Photos from Louie Patrick's post — Ford fiesta mk1 and mk2 owners forum

Considering parting with these as getting a taste for super lights

They are BCW Brock B1s in very rare specs as follow -

Fronts - 14 x 8J et15

Rears - 14 x 9J et15

All 4 wrapped in 195 45 14 uniroyals, grip like shit of a shovel, all like new

In these specs they are incredibly scarce, cant find no others!

These fit inside standard arches and with a 2 inch rear drop they only rubbed with 4 people in the car when i didnt slow down for a little speedhump (25ish)

One wheel has a bit of kurbing (rear left, 4th picture, top left) and odd little bit on 1 other,

will have a fresh polish before they go for new owner

No centre caps currently, but have found some for £35, full asking price ill get them

Located welham green, al9, can deliver with paisely freight uk mainland for 35, or personally if im in that direction

Price is 350, no offers, however i may be interested in a deal on some super lights or rs style 4 spokes (but they MUST be diamond cut in good conditiom)

%d comments

    For sale is my mk1 Ford Fiesta project the shell is a 1300s with a 1600cvh... — Ford fiesta mk1 and mk2 owners forum

    For sale is my mk1 Ford Fiesta project the shell is a 1300s with a 1600cvh fitted 60k on the clocks, the shell is in mint condition with no rust on it that I can see and aren't that easy to get hold of any more it comes with 4 different wiring looms including the one that's in the car comes on a set of pepper pots with 2 spare it is on lowering springs all round with spax struts I believe I have the seats, dash, clocks, centre console, gear linkage I also have a spare dashboard and cradle I also have the seat belts and other little bits and bobs I'm looking for £3000 or nearest offer willing to swap for a running mk1 project and cash my way all questions welcome

    %d comments

      Photos from Julia Brent's post — Ford fiesta mk1 and mk2 owners forum

      Ford fiesta mk2 1.1 really clean shell never been welded. Rear arches are spotless so is boot floor and inner arches front and rear. Little rust bubble on corner of one door. Think it's had new front wings at some point. Car did have a rs turbo engine in it and front has been cut slightly for the intercooler, this engine has been removed now and the 1.1 has been put back in but needs wiring up. Both the rear drums are off but all in the car although is missing one backing plate. Battery was relocated to the boot for any other information just ask. £500 Callington cornwall

      %d comments

        Photos from Murray Ingram's post — Ford fiesta mk1 and mk2 owners forum

        Bonus ball raffle Admin delete if not allowed as I know it's not a fiesta but thought some people might be interested. Located montrose

        Raffling my mk 1 golf gti cabriolet rivage. The car comes with one years mot as of yesterday no advisories. Very good shell no rust at all. 1.8 16v kr engine fitted, Renault turbine wheels, 119k, stainless exhaust and 4 branch manifold. The draw will take place once all number and gone and paid for. Not taking payments until all numbers are gone then il post my PayPal address. £50 per number. Will post lists of numbers and names in comments. Feel free to share.

        %d comments

          Photos from James Hopkinson's post — Ford fiesta mk1 and mk2 owners forum

          Hi guys I have decided to sell my mk1 van project. I have owned the van for 3 years and have not really got anywhere and I need to realise I'm never going to finish it. Now to make it perfectly clear, it requires restoration and completing. Please don't think you can jump straight in it and drive off it has not ran since 2013. It will need welding (typical mk1 places, boot floor corners and floor pans). It had horrible 90's style wide arches when I got it and I removed them to fit original arches but never got round to it so will need new arches. It has a 1.4 cvh but this was already in the car when I acquired it. It does have headlights and black slim bumpers also a straight bonnet. Interior is a mix of mk2 mk1 stuff but is also incomplete (needs headling). Previous owner tried converting to a car so put seats in the back. It does still have the metal window panels though. I simply don't have the time for it and I don't want it to sit there when it couldn't go to someone who could restore it, drive it and love it. I have the logbook and it's a 1983 1.1 van L on a 'Y'. It will need trailering away. Sold as seen.

          I have been ordered by the council to remove it and have 28 days otherwise I will have to scrap it.

          £600. Open to offers. Location Stockport (near Manchester).

          %d comments

            Photos from Louie Patrick's post — Ford fiesta mk1 and mk2 owners forum

            1.1 valencia for sale, 60k ish on it, will confirm when i get to my clocks

            every gasket changed, stripped down, cleaned and de carboned through out, valves cleaned and reseated, new stem seals, all painted

            Comes with original carb and inlet, exhaust manifold and water rail, flywheel, alt brackets, starter, alternator, anything not listed but needed ask

            4 speed box here also, again cleaned and painted...including inside the bell housing (im that type of guy!)

            Located welham green, al9

            Will be in essex at the weekend

            Any questions ask

            150, may listen offers

            Rebuilt it intending to use the car as a 1.1 whilst doing a zetec build but the zetec has got further than the car!

            %d comments

              hi guys just to let you know that i brought a set of supersport fiesta alloys... — Ford fiesta mk1 and mk2 owners forum

              hi guys, just to let you know that i brought a set of supersport fiesta alloys of someone called BEN SQUIRES and only 2 turned up as courier mucked up, (this was not his fault ) but he could not be nothered to chase courier company as they would only deal with him, and the 2 that turned up were buckled and hand painted, so was shocked to throw 180 quid down the drain. He then blocks me ignores me and makes out i damaged them, so just a warning guys dont buy anything of this guy, i believe he lives in cornwall.

              %d comments

                Ford Fiesta Mk1 Project 90 Finished — Ford fiesta mk1 and mk2 owners forum

                Ford Fiesta Mk1 Project 90% Finished

                For Sale is my Ford Fiesta Mk1, this car is and has been taxed and MOTed for the last two year and

                is a real Pocket Rocket, it's in Red Oxide at the moment and will require a full paint job inside and out. Would look good with some new bucket seats and door cars, lots of money has been spent on this car but it is time to say Goodbye.

                2.0 Zvh engine 2litre bottem end/rs turbo head

                Twin 40 DCNF Carbs with Trumpets and filters

                5 speed gearbox

                Mk1 Mondeo Brake Servo and master cylinder Braided Brake hoses

                Xr2 front discs, Pads and Calipers

                Kustom Karl Rose jointed/adjustable suspension Front & rear Koni Adjustable Shocks and uprated springs all around

                Half roll cage

                MCR Arch kit with arches cut/enlarged for clearance

                Brookland Rs 7 spoke 13" alloys with new tyres

                Mk1 XR2 dash Board

                Mk1 XR2 steering wheel

                Mk1 XR2 front lights/surrounds

                De-badged Grill

                American Spec Lower Grills (hard to find)

                Front Quarter skinny bumpers

                Rear skinny bumper

                Spare Roof (if you want to lose sunroof)

                New spare full front and back Skinny Bumpers

                Recaro Front Seats

                Remote Central locking and boot popper

                Smoothed locks

                Rear Mk1 XR2 boot spoiler

                Bonnet pins

                Mk2 fiesta rear lights (fog & rev lamps built in)

                Rear strut brace

                More pictures available

                £3250 Ono

                %d comments

                  Photos from Jason Jd Jay Croft's post — Ford fiesta mk1 and mk2 owners forum

                  Please read the ad to the end.as all questions should be answered in the description. OK guys due to needing my garage back for storage up for sale is my xr2 with zvh conversion by previous owner.I know how daft the retro ford market has gone but I'm gonna price it sensible for a quick sale.Not many tidy xr2s with mot come up this side of 3 grand. This one is.Looking at the mot history it had lots of previous welding advisories up to 2012.mot in July 16 shows no advisories so the necessary welding must have been done during this period off the road.Tailgate ,bonnet,doors and roof round sunroof all pretty mint.paint wise it's been painted within last few years and is presentable though prep on rear arches Is poor where they have filled after new rear arches fitted. has no visable rust or scabs on the body and underside sealed after welding.A previous owner added new clocks as old speedo wasnt working hence the mileage reading different from 2012 to 2016 .The speedo doesnt work on these either so it was probably the cable not the clocks.windows seals like new.Sunroof works fine .still needs the satin black round the windows but paint provided.ive added the xr2 decal, stripes and under bonnet decals from dmb graphics plus bought a replacement rear wiper to replace the clio one fitted.3 new bosch wiper blades included.ive sourced an xr2 interior clock /light needs connectinv up and also the rare as hens teeth towing eye cover.ive added a k and n filter( original included) and brand new exhaust. Running slightly lowered spax all round.ive Re painted the pepper pots and had correct 185 60 13 tyres fitted with great tread.The zvh is an 1800 zetec bottom end with mfi turbo head.previous owner told me the head was skimmed for better compression and new timing belt and water pump and 1.3 idler fitted and brand new carb which has done almost zero miles.interior all complete even uncut parcel shelf.rear strut brace still fitted. Spot lights and genuine ford nos ford brackets included.

                  Now the bad bits.

                  Its been a track car in the past and a previous owner has removed some big brakes and added either different hubs that have smaller calipers and solid discs and these are poor.I have sourced a pair of xr2 hubs and calipers for refurb which will be but included and come with brand new caliper rebuild kits , red caliper paint, vented discs and pads..drivers window not coming down straight. Probably slid off channel.only 1 key but fits all locks , ignition etc

                  %d comments

                    Photos from Andrew Hendry McDonald's post — Ford fiesta mk1 and mk2 owners forum

                    I will be looking to sell my Mk1 xr2 in the next month ot two, i have owned it since 2006, its caspian blue and has been used as a track car most of its life (but has been sat up in dry heated garage from 2006 up until 2015) as i was buying engine parts and transmission before put it back on track again.

                    It will be a rolling shell and is a very very solid shell with only maybe two parts of small welding being carried out to car.

                    This would be ideal to use a rotten mk1 xr2 to make back to standard car again. If it doesnt sell then i will put in garage again for another five to ten years as an investment. Thanks.

                    %d comments

                      Photos from Marc Nixon's post — Ford fiesta mk1 and mk2 owners forum

                      Me and brother Will Nixon just got this may not look the part but has a heart of gold;), 1.6 xflow bored out +60, 244 cam, 40s, forged pistons and rods, lighted flywheel, so they say anyway, has an rs turbo gearbox but he says it locks up when turning and pulls violently whichever way you are turning, almost like a welded diff anyone got an idea why it does that

                      %d comments

                        Photos from Barry Smith's post — Ford fiesta mk1 and mk2 owners forum

                        Hey guys, I brought this little Fiesta 1.4 ghia last year September, 52k with full history. I'm the 3rd owner the first 2 being husband and wife who brought it new from Hartford motors in oxford. Since buying it just sat in my garden. Mot ran last November. I knew it needed some welding so today I removed the Carpet to find out how bad it is. To my surprise just one bit of welding needed to the floor on the drivers front as can be seen in the pictures, only other parts needed is passages sill at the rear as you can see from the pic it's spitting. But only the back section rest of the sill looks solid. The drivers side lower arch where it meets the sill needs sorting as again can be seen in the pics rest of the sill is solid. The arches themselves are perfect. The rest of the body is solid apart from the odd age related dent and scratches, the worst being a little one by the drivers side repeater light and front bumper 1/4 being damaged.. The interior is good apart from the dash bored fading and parcel shelf being past it. If I was to sell it as it is what do you guys think I'd get for it. As I'm unsure what I'm going to do with it as already got a mk2 escort.

                        %d comments

                          Photos from Matthias De Leersnyder's post — Ford fiesta mk1 and mk2 owners forum

                          Hallo

                          wegens tijd gebrek gaan mijn Ford fiesta tjs in de verkoop. De groene is een 1000cc en de grijze op papier een 1.1s maar er licht een kent motor in 1300. Deze staat bijna klaar voor te spuiten enkel de linker voorbil moet er nog op gelast worden al de rest is gelast. Ophanging vernieuwd, remmen enz... Het groentje rijd perfect maar was afgekeurd voor de carrosserie. Ik had hem gekocht voor onderdelen om de grijze compleet aftewerken. Wegens verbouwing en druk werk vind ik de tijd niet meer om ze aftewerken. Allebei van het jaar 1983 met papieren natuurlijk.

                          Prijs 1000 euro.

                          Ford oldtimer mk1 mk 1 fiesta

                          %d comments

                            Photos from Natalie Johnston's post — Ford fiesta mk1 and mk2 owners forum

                            **SCAMMER ALERT**ROBERT PETERS of SCRAP MY CAR LTD. / SCRAP MY VAN - 3 Canal Rd, Gravesend, Kent

                            SHORT STORY:

                            Robert Peters SCAMMED £2250 OUT OF ME FOR A CAR THAT HE SOLD TWICE!

                            LONGER STORY:

                            Im sure everyone will remember the 1980 Escort 1.3L with 346 miles for sale last week from Steph Johnson who posted it on behalf of Robert Peters (boyfriend). Duno y he didnt post himself!! Banned from group??Well i bought the car for £2250 (inc £100 delivery from a recovery man to a friends house) in gud faith, that Friday morning 10th Feb, after he told me a luvley wee, very longgg story of it being his deceased grandas etc. And it had to go ASAP as he had nowhere to store it and was too scared to keep it on his drive incase it got stole and that the recovery man still had it on his truck and he wud get him to deliver it to my friends in Croydon, as i am in N.Ireland so i cud not view car in person. And instead of paying recovery man his £100 cash on delivery i shud transfer it to him instead as he wud pay him for me. Also the car was on Ebay (as well as FB on this group) for £99 + £1999 postage tho didnt inc ANY delivery at all as i asked him that! It was listed under Car Manuals! This guy is into his cars so isnt that stupid to list under wrong category, esp a classic Ford like this! Lukin bk that was a dodgey listing!! He ended the car on Ebay to do the deal with me outside Ebay. So, stupidly i transferred £2250 IN FULL about 2hrs after advert was posted, and was kept being put off by Robert time and time again from Friday 10 to Thurs 16 as he said no muny was ever received!! Everyday was a nitemare, sooo stressful for me waiting on this payment to clear and him not replying to me when i asked him if it had cleared each day, he made me think it was my bank delaying it the Whole time!! Was goin nuts at my bank for near a full week!! So i was cross at the bank but also had really bad anxiety wondering if he was a scammer! Robert was a nitemare to get responses out of! After the first 2 hrs of which there was constant contact between us, he then wudnt respond bk to me, only now and again with a short answer. Wudnt answer 95% of calls or texts. Obviously in hine sight the payment HAD cleared after 2hrs and he didnt need to keep in contact any longer as he got the muny!! Then as soon as i text Robert to say i was gettin a trace done on the payment and wud hav results at end of Thurs 16th to see where it was, he text bk straight away sayin that the muny had just cleared in the last 10mins but that he had already SOLD the car as he thought i hadnt sent muny!! Even tho i sent him screenshots of transfer confirmation straight after i transferred it AND a video of me logging into my bank and showing it came out of my bank on Fri 10th and i rang both his and my banks for more info etc. all that week chasing everyone about it and went on Twitter to my bank as well to complain about it taking so long! Obviously gutted and completely worried now that he had my muny and ive now no car or muny and he had sold the car on again that i had paid for already, i demanded he transfer bk the muny ASAP. So he said he wud transfer muny bk that day at 6.30pm so i asked him to send a screenshot confirmation of transfer as i had done for him with mine and hav never heard anything since!! That was Thurs afternoon! I also knew early on from researching him that he was actually a scrap man and car enthusiast with a business called Scrap My Car and it was obviously him who recovered it for prob £50 or for free! And not the grandson as he said! But i played along with his story as i didnt care too much as i just wanted the car. So he sold that car TWICE! And still has my muny and wont contact me bk to transfer it bk! Ive reported him to the Police and the Bank Fraud team and text him this and still no response from him. Prob thought me being a girl and wasnt overseas that I wud be an easy target. He made a mistake with the wrong person! I wont let this lie! Theres more than enuf evidence to prove it! BEWARE, DO NOT BUY FROM THIS MAN!!!! He has obviously DID THIS BEFORE!!

                            %d comments

                              Photos from Dean Emmerson's post — Ford fiesta mk1 and mk2 owners forum

                              here is my mk2 fiesta 1.1 popular very good little car haven't owned long but due to loss of storage she has got to go

                              it has covered 45000 miles from new

                              has mot till sep/2017

                              no rust on the car very good condition slight imperfection on roof hardly noticeable

                              car starts on the button with manual choke

                              has a 4 speed gear box

                              the car has no knocks or bangs and is ready to be used

                              the car looks to have had a full paint job but not 100% sure previous owner said it was always garaged

                              has original ford radio along with the mats and rear window sticker from when it was brand new

                              the car drives 100% and im going to regret this sale

                              £1600ovno

                              Logbook will need applying for

                              please no messers as this needs to go

                              collection from great Yarmouth nr31

                              for anymore info please call ‪07702559266‬

                              %d comments

                                Photos from Wayne Jerrim's post — Ford fiesta mk1 and mk2 owners forum

                                Ford Fiesta 1.1 Ghia

                                47,000 miles

                                One previous owner before me

                                Runs and drives like it should

                                Very strong and tidy body apart from rear exterior arches

                                Will get photos off under the carpet to prove it's a solid motor

                                Seats and interior are in excellent condition

                                100% original

                                Dent in the bonnet due to a ladder falling on it when it was stored away in a garage

                                Brakes need new shoes and pads

                                Lovely little car

                                Age related marks but nothing serious

                                No mot or any paperwork as was stored away for 12 years

                                £900 or sensible offers

                                Thanks

                                %d comments

                                  Looking for a bit of info on fitting a st170 in my mk2 fiesta if anyone can... — Ford fiesta mk1 and mk2 owners forum

                                  Looking for a bit of info on fitting a st170 in my mk2 fiesta if anyone can shed a bit of light on the subject would be much appreciated.

                                  The vvt if I was to remove it would it be just the case of swapping the cams for standard 2.0 blacktop cams?

                                  I believe if keeping the vvt I'd have to cut away some of the support on the bonnet.but if i remove it do I still have to?

                                  So surely someone out there has come across these little problems and over come them so any info available would be great thanks.

                                  %d comments

                                    Hi guys just wanted to ask a few questions about upcoming changes to my mk2... — Ford fiesta mk1 and mk2 owners forum

                                    Hi guys, just wanted to ask a few questions about upcoming changes to my mk2 fiesta as I'm 16 and new to it and thought what better place to find out more!

                                    1) Would a Mk2 XR2 exhaust fit my 1.1 popular plus easy enough?

                                    2) I am looking at ordering some new wheels that are 13x7 I have a feeling they would be to wide? How much will they poke out of the arches?

                                    Thanks

                                    %d comments

                                      Situation — Ford fiesta mk1 and mk2 owners forum

                                      Situation:

                                      6 speed st170 box, which means the shifter cables foul the 1100 servo. Iv heard talk of being able to drill the back of the original clutch pedal and run a willwood master of what size?

                                      Then I can just run a bias box IF space will allow.

                                      Floor mounted pedal box isn't an option with running low backs as I don't want my knees by my ears.

                                      Has anyone done this already?

                                      %d comments

                                        Photos from Ryan Bush's post — Ford fiesta mk1 and mk2 owners forum

                                        Good afternoon lads and lady's I'm thinking of selling up as I don't get chance to work on my mk2 xr2 on a d plate I've had the car now over 7/8 years. It's been polybushed all round and all welding has been complete(front wings,slam panel,rear arches,sills,patching) so it's a solid xr2. It does still need some work doing other to be finished ie paint needs to be done she is in mate black, Roof needs finishing off. Dash needs putting back together. Body kit needs putting on arches rear valence or on the car. It has front recaros in cream leather rear bench matching fronts. Has mondeo brake servo fitted but backs brakes could do with bleeding again. Rear strut brace welded in. Xr2 engine (not original engine) k+n filter with stainless steal exhaust, new calipers on the front with drilled grooved discs,capri pepper pots with correct wheel bolts to. engine runs nice no smoke bangs or knocks.everything is there to finish it off. Please ask for any more info or pics of places. not sure on price Many thanks Ryan

                                        %d comments

                                          Photos from James Evans's post — Ford fiesta mk1 and mk2 owners forum

                                          I've owned my fiesta since 2012.i got the car on 32000 and it's on 43000 now it's been my first car!I've done it all over the years​ Since then its had the following:

                                          : Engine rebuilt in 2014 as I seized it

                                          :1.3 crossflow

                                          :2x brand new wings last year

                                          :1x new bonnet

                                          :1x new front panel

                                          :Rs 4 spokes

                                          :Brand new Webber carb

                                          :Itg air filter

                                          :I have xr2 arches to go on the car not done them yet

                                          :I also have a set of pepper pots to go with the car and the standard set of wheels

                                          :The Shell has been sprayed inside and out

                                          :It really does look apart it would be a shame to let it go but I've done all I can to it and I fancy a change

                                          Seeing what I'd get

                                          %d comments

                                            aluminium flywheel to suit CVH engine — Ford fiesta mk1 and mk2 owners forum

                                            7 1/2 LBS or 3.4 KGish

                                            aluminium flywheel off my daughters old stock car

                                            good condition only raced for 3 seasons

                                            has light surface rust

                                            time to clear out, i'll be listing other stuff head carb cam quaiffes etc as soon as i get pictures

                                            price is collected or i can post for an extra £10

                                            John 07814 010991

                                            aluminium flywheel to suit CVH engine

                                            £150 - Swadlincote

                                            7 1/2 LBS or 3.4 KGish

                                            aluminium flywheel off my daughters old stock car

                                            good condition only raced for 3 seasons

                                            has light surface rust

                                            time to clear out, i'll be listing other stuff head carb cam quaiffes etc as soon as i get pictures

                                            price is collected or i can post for an extra £10

                                            John 07814 010991

                                            %d comments

                                              Richard Fegan shared a link to the group: Ford fiesta mk1 and mk2 owners club. — Ford fiesta mk1 and mk2 owners forum

                                              %d comments

                                                Photos from Rob Hill's post — Ford fiesta mk1 and mk2 owners forum

                                                Right guys i thought i let you know i brought some alloys from Ben Squires few weeks ago and he said they were good condition. He sent them to me and 2 got lost in the post. Now that i dont blame him for as it was not his fault but he is the only one who can write and chase it out with the courier company and he is not putting much effort into this and now ignores me. But the 2 i recieved were buckled and unusable and hand painted and he did not state any of this. So even if the other 2 turned up they probs be just as unusable as the other 2. Feel let down you trust ppl on the forum and get mugged off by them. 180 quid wasted . Any guys able to help me out with some supersport wheels cheap

                                                %d comments

                                                  Photos from Tim Brown's post — Ford fiesta mk1 and mk2 owners forum

                                                  My fiesta needs to go £2000 b reg xr2 2.1 turbo, engine last dynoed few years ago 241.5 bhp 268ftlb torque , forged pistons , arp bolts , new and solid lifter cam , stages 3+ hybrid turbo, huge intercooler 5 th injector with programmable controller , dump valve , omex rev limiter with launch control, load and loads done , Leda coil overs , full wet and dry slicks on xr2 steels and xr2i steels , prob around £500 of spares with it as well , needs resembling engines out at the mo but in one piece I wanted to refresh and do afew bits but never go round to it , comes with all my spares ,

                                                  With car trailer that needs work but structurally very good just lights and bearings from sitting

                                                  %d comments

                                                    Bought this replacement pipe off ebay Not sure if anybody else has but found... — Ford fiesta mk1 and mk2 owners forum

                                                    Bought this replacement pipe off ebay. Not sure if anybody else has, but found it a pain to fit. Had to remove the bracket behind exhaust and play around with the gearbox mount to make fit. Think it was because its slightly longer than the standard one.

                                                    Just thought I'd let people know before buying what might have to do.

                                                    %d comments

                                                      Photos from Matt Smith's post — Ford fiesta mk1 and mk2 owners forum

                                                      Hi. This is my mates car and we're trying to work out what it's worth, to maybe sell it one day or keep it for a fun car. It's an xr2 with Turbo technics conversion. Full cage, poly windows and other odds and sods. It drove to the ring with fast ford many years ago and made it round. It's obviously not mot'd etc. We dragged out it's storage a while back, chucked some fuel in it and it fired right up (video taken not long after, hence the dust! Does live in a large warehouse). We removed some of the stickers, wiped off the dirt and tucked it away again! So, any ideas? It's not a minter, but it is a hell of a lot of fun!

                                                      %d comments

                                                        Here for sale I have scalextric sets — Ford fiesta mk1 and mk2 owners forum

                                                        Here for sale I have scalextric sets

                                                        Rally sprint which is the red and black xr2is

                                                        Night stages which is the xr3 yellow and blue

                                                        Escort rally set which is the escort to Cosworth white and blue

                                                        Ford Rs Cosworth which is the Rs 500black and red

                                                        Also have Porsche challenge

                                                        And many other extended pieces and extra cars such as Audi Quattro 4x4 Vauxhall calibrate and many more would like to sell as job lot but may consider splitting and I will not be selling any of this for peanuts as these are items from child hood all genuine and boxed last checked all working fine although maybe in need of new braids on cars and a light clean of track and connections for any pictures or any other information please call txt me on 07469193733

                                                        %d comments

                                                          Photos from Shane Anthony Eardley's post — Ford fiesta mk1 and mk2 owners forum

                                                          Fiesta mk2 rs turbo efi ofac 138bhp

                                                          Regrettable sale but new car means just not going use it like i should no swaps and im not rushing sell its not in way and in no rush for the cash ...

                                                          Interior

                                                          Full xr2 interior seats dash board and steering wheel very clean no rips or damage has centre vents removed and fitted with boost volt and oil pressure gauge

                                                          Ecu mounted in glovebox

                                                          Subs sank in rear boot boards and 6x9s in shelf with amp on rear seats

                                                          Suspension wheels and brakes

                                                          50mm outlaw motorsport custom springs

                                                          Fully polybushed front too back

                                                          Gas adjustable gold rears less than 500 miles on them

                                                          Gmax front shocks refurbished

                                                          Xr2 rear axle

                                                          13 inch 5.5j sabre alloys with polished lips full set matching maxis tyres mint tread grip great lips could do with repolish cause of lacquer peel

                                                          Fully rebuilt xr2 rear drums

                                                          Xr2 front calipers drilled grooved front disks with green stuff pads

                                                          Braided brake lines front and back

                                                          Mondeo 2.0l servo non abs with brackets to stop servo lift stops on a dime

                                                          Has set tubular polybushed rear arms and polybushed adjustable rear panhard but not fitted yet

                                                          Fuel system

                                                          Only ever been ran on super unleaded since been built

                                                          Cosworth high pressure fuel pump

                                                          Internal swirl pot fuel tank brand new

                                                          Adjustable power boost valve

                                                          Focus injectors need swapping for beiges which come with the car 7 in total

                                                          Engine and management

                                                          1.6 cvh mk3 rs turbo efi engine fully gone through

                                                          Forged 1mm oversized bottom end with steel conrods done about 1500 miles

                                                          Big valve head just been skimmed new headgasket 100 mile ago

                                                          T3 escort turbo no smoke or play pulls great at 15psi adjustable control on actuatir

                                                          Red silicone pipes boost and coolant

                                                          Xr2 radiator with 10 inch front mounted fan for clearance on turbo done 100 mile

                                                          Kent adjustable cam pulley

                                                          Rs turbo gearbox with organic race clutch capable of 250+bhp

                                                          Xr2 drive shafts

                                                          Escort intercooler no front mount to give sleeper look

                                                          Lower 82 degree thermostat

                                                          Ofac management running on piggy back loom to connect rs engine loom to orignal mk2 loom

                                                          %d comments

                                                            Photos from Andrew Yarlett's post — Ford fiesta mk1 and mk2 owners forum

                                                            Hi guys, by the end of the weekend I will be finished with my mouldy for my front end. It has new mk1 fiesta wings and a front panel inside it. They have been cut up however if you are repairing a mk1 on a budget and around your headlights has rusted out or a section of the front panel etc this will sort you out.

                                                            I don't want anything I will need it out of my way and it would be a shame to scrap it all.

                                                            I'm based in Buckingham MK18 I don't want to have to cut it up into section for people it would be the whole lot however we could cut it into 2 to help fit it in a car.

                                                            The back half of the wings are still being used so only what's yellow in the last photo

                                                            %d comments

                                                              Photos from Shane Baker's post — Ford fiesta mk1 and mk2 owners forum

                                                              *please share*

                                                              The chance to win for only £20 + winner gets there £20 back !!! A full zetec install.package !

                                                              59 numbers available and once all have been paid for the bonus ball.of that weeks lottery draw or the first draw after the last number is paid for will be the winning number.

                                                              Package consists of.

                                                              1800 silvertop

                                                              R1 bike carbs and fast dan inlet

                                                              Nodiz ecu

                                                              Bike.fuel.pump

                                                              Series 2 rs turbo lsd gearbox

                                                              All 3 vinbratechnics engine and gearbox.mounts.

                                                              Ram.horn manifold with single.down pipe

                                                              Xr2 radiator and fan

                                                              Xr2 altinator bracket and altinator

                                                              Siliocone bottom.hose brand new

                                                              And every other water hose needed for the conversion.

                                                              I think thats it all to get it in fited up and runing

                                                              This package is currently up and runing in a car and all setup ready to go.

                                                              Optional extras are a fitting service for £275 drive in drive out or collection and drop of service for an additional charge along with a conversion charge.

                                                              Winnner is responsible for collecting.or i will put it on a pallet for collection.

                                                              Paypal is Marc.067@hotmail.com

                                                              Please send as family/gift to avoid charges please

                                                              Thankyou and good luck

                                                              A paper numberd grid will be contantly posted and updated in the comments.

                                                              Feel.free to share.on other oages to generate interest.

                                                              %d comments

                                                                Photos from Austin Tant's post — Ford fiesta mk1 and mk2 owners forum

                                                                Description:

                                                                88/89 mk2 fiesta registerd as a 1.1 auto

                                                                Spec

                                                                2.0 zetec

                                                                HO Inlet manifold

                                                                Apparently been Cammed, no proof

                                                                Rs1800 chipped ecu

                                                                Silicone hoses

                                                                S1 lsd gear box (harsher diff than s2)

                                                                Quick shift

                                                                4-2-1 manifold

                                                                Ashley exhaust (pops nicely)

                                                                Sierra cosworth front brakes

                                                                Mondeo servo

                                                                15'' pug steels to fit over cossies

                                                                Xr2 kit minus bumpers

                                                                Poly bushed suspension

                                                                Uprated springs and shocks (think shocks are spax)

                                                                Stripped out interior

                                                                Alloy tank in boot

                                                                Mx5 seats

                                                                Vibra tecnics mounts

                                                                Rs turbo clutch

                                                                Mot runs out in April will need the Sills plating and breaks bleeding, one calliper has a snapped nipple, I have ordered a nipple to fix this.

                                                                Number plate lights in boot lid fitted

                                                                I've not long bought this car from a friend, bought it but I've just started renting so either need to sell or swap for something more suitable for day to day as this is definitely more of a toy but it's buckets of fun.

                                                                I value it at 1250

                                                                Located Somerset

                                                                %d comments

                                                                  Please delete if not allowed — Ford fiesta mk1 and mk2 owners forum

                                                                  Please delete if not allowed

                                                                  Any love for this car. I will take more pics tomorrow as I need to clean it out but im looking to see what about for swaps?

                                                                  It's a Ford fiesta mk5 zetec s with 1.7 puma engine with tape ecu and loom. It has eibach springs lowered 35mm if i can rememeber. It has st170 front brakes with alot of meat left on the pads and discs. Just needs mot 2 rear socks and 1 rubber bush for the wishbone and the rs bonnet vents need a respray and 2 tyres?

                                                                  Just haven't got the time to finish it.

                                                                  Other then that it's not long had a full service on it

                                                                  Drives spot on.

                                                                  Looking for swaps only and not part x

                                                                  %d comments

                                                                    Photos from Dean Emmerson's post — Ford fiesta mk1 and mk2 owners forum

                                                                    here is my mk2 fiesta 1.1 popular very good little car haven't owned long but due to loss of storage she has got to go

                                                                    it has covered 45000 miles from new

                                                                    has mot till sep/2017

                                                                    no rust on the car very good condition slight imperfection on roof hardly noticeable

                                                                    car starts on the button with manual choke

                                                                    has a 4 speed gear box

                                                                    the car has no knocks or bangs and is ready to be used

                                                                    the car looks to have had a full paint job but not 100% sure previous owner said it was always garaged

                                                                    has original ford radio along with the mats and rear window sticker from when it was brand new

                                                                    the car drives 100% and im going to regret this sale

                                                                    £1700ovno

                                                                    Logbook will need applying for

                                                                    please no messers as this needs to go

                                                                    collection from great Yarmouth nr31

                                                                    for anymore info please call ‪07702559266‬

                                                                    %d comments

                                                                      Doing a zetec conversion on my mk2 fiesta 1989 from a 1 1 to a 1 8 silvertop... — Ford fiesta mk1 and mk2 owners forum

                                                                      Doing a zetec conversion on my mk2 fiesta 1989 from a 1.1 to a 1.8 silvertop can anyone tell me the best radiator to use also where I can get all the pipes needed on the engine and the pipes for fuel, also need a fuel pump and mount that will work if anyone has any of the parts I need please message or reply also need an xr2 alternator

                                                                      %d comments

                                                                        Photos from Matt Allen's post — Ford fiesta mk1 and mk2 owners forum

                                                                        so waited a month for this fuel pump to turn up (rs turbo one) and these are the ports... i'm guessing the bigger one is in and other out as there's no arrow for flow...?

                                                                        also the fittings are 2

                                                                        different sizes can i get away with a reducer at one then? and then just push fuel onto the other and jubilee clip it? looks like it needs a threaded fitted??

                                                                        %d comments

                                                                          Photos from Stuart Smith's post — Ford fiesta mk1 and mk2 owners forum

                                                                          For sale this Mk2 1.1L rare 5 speed manual from the factory. 85k miles, was cat C years ago, was a minor incident with a dent to the front wing according to previous owner and it's been repaired to high stsndards ( I can't tell there was ever any damage) passed victory check years ago so she's all legit. She had a rough weld patch to one sill section to get through mot. This could do with flitting back and blowing in. Other sill was replaced before I took ownership, to a high standard.

                                                                          Exterior is in fantastic shape for age, only rust is on the front of the bonnet as seen in pics. Interior is mint, will get pics of it tomorrow and add. Engine bay spotless as well, it's been really well looked after. Xr2 steering wheel, rest is standard.

                                                                          Starts and drives spot on. I'd keep it if I didn't have my cossie to build, she's bleeding me dry lol.

                                                                          Based in London se9

                                                                          Cash on collection, mot until November

                                                                          £1000 ovno

                                                                          %d comments

                                                                            Photos from Adam Foster's post — Ford fiesta mk1 and mk2 owners forum

                                                                            I sold my mk2 fez a while back and am having a clear out of my left over spares.not looking for profit, just wanting back what each thing cost me. I'm i Cleethorpes/grimsby but often go to york and near Middleborough visiting family.

                                                                            Rear interior £100 all in. Parcel shelf, boot boards, seats, hinges, boot trim, sound proofing.

                                                                            Exhaust and zetec downpipe & manifold. £75. Mk2 Stainless exhaust modded with flexi and connection to the standard zetec downpipe and manifold

                                                                            Alloys x 5. £80. 1 very good tyre. 2 good tyres. 1 I think is a remould and one bare wheel.

                                                                            SOLD Loads of zetec injection and inlet bits. SOLD. So metal inlet which I put a 115bhp throttle body on, standard body included. Plastic inlet manifold. Pipes and crossover. Injector plate complete. Engine loom with pats and key included if wanted for free as I never used it so can't guarantee it works.

                                                                            220mm clutch luk (fiesta rst) hardly used. £25

                                                                            Fiesta rst crossover. £25

                                                                            Frst standard intercooler £10. Double capacity £25

                                                                            Escort rs turbo oil feed £10.

                                                                            2 x bumper end cap plastic mounts £10

                                                                            Can post the smaller stuff for cost price or pack things for you to arrange courier

                                                                            %d comments

                                                                            Photos from Josh Harvey's post — Ford fiesta mk1 and mk2 owners forum

                                                                            With huge regret I'm breaking my unfinished st170 mk2 fiesta track build. I'll add to this as I remember all the parts I have.

                                                                            Gaz golds new -sold

                                                                            Oz ka rally wheels-sold

                                                                            Fully rebuilt st170 engine, new rings, big and mains, Rick wood fully rebuilt head with re profiled cams, new gaskets and timing belt kit, re angled wp housing, reverse impellar + all painted -£1100

                                                                            Brand new in box ttv lightweight flywheel to take standard zetec clutch-£220 sold

                                                                            Brand new vibratechnics engine mount - £65

                                                                            Brand new vibratechnics gearbox mounts x2 - £80

                                                                            Gold 1.3 ghia shell, stitch welded and caged with gussets + weld in seat rails, fully polybushed, outlaw trailing arms, orbital panhard, polished pepperpots, gear turret with focus gear shift/ cables and box also 1.3 cvh rad same as xr2. Rear arb shell too £1300 Sold

                                                                            Xr2 shafts - £150

                                                                            Shane modded cvh/zetec engine bracket - £50

                                                                            Cvh alternator bracket- £30

                                                                            Single skin carbon tailgate with pins, has some slight damage on edge from transport, not very noticeable once on car- sold

                                                                            Xr2 rebuilt calipers with carriers - £150 sold

                                                                            I'll add anything else I remember. Prefer collection from Westbury, Wiltshire

                                                                            %d comments

                                                                              Photos from Richard Hatch's post — Ford fiesta mk1 and mk2 owners forum

                                                                              Another post full of pictures of bits I have I will list some here but will probably miss you loads so look for the pictures and see what I have,

                                                                              Cvh n/a and cvh turbo engines both have heads off to check both ran ok, bare engines no manifolds etc £70 each

                                                                              2.0 zetec straight out a mondeo 100k £225

                                                                              Mk2 metal bumper cut for intercooler and intercooler £100 missing bumper ends!

                                                                              Pair of xr2 bumpers not bad condition £150 pair

                                                                              Xr2 rear atb complete £50 each

                                                                              Mk2 turbo exhaust system £150

                                                                              Loads of wiper/indicator switchs £10 each

                                                                              Loads of plastic trims offers

                                                                              Window and door rubbers offers

                                                                              Indicators clear Amber smoked offers in pairs

                                                                              Carpet offers

                                                                              Doors £30 each only n/s passagers

                                                                              And loads and loads more this is my last trip I expect I'm trying to not be greedy on prices I need it all gone so can deliver on my route at the weekend from Devon to Essex,a303 m3 m25 anti-clockwise, up the m1 and across somewhere to Manchester up to Wigan then back down past Birmingham to Devon,

                                                                              I will meet of any junction on my route Kristian Lipscombe Will also be joining me if he gets out of bed

                                                                              %d comments

                                                                                Looking to get a group buy together for aluminium coolant rails for the 1 — Ford fiesta mk1 and mk2 owners forum

                                                                                Looking to get a group buy together for aluminium coolant rails for the 1.3/1.6 mk1 fiestas as the steel ones always rot away and are a ridiculous price NOS. These aluminium ones are being produced by Collin Reay who also makes amazing aluminium radiators and other parts to order for the same price as what I have seen used rusty steel ones go for! Once the 1.3/1.6 pipes are done I'll be looking to get another group buy together for the 1.0/1.1 version. The reduced group buy price is £40 DELIVERED if more than 10 orders come in

                                                                                %d comments

                                                                                  I have finally decided to get on with restoring my xr2 rather than selling it... — Ford fiesta mk1 and mk2 owners forum

                                                                                  I have finally decided to get on with restoring my xr2 rather than selling it my question is how much should I be paying for a respray incl engine bay there's very little prep work needed looking to have a good job done but I want it to look like it was painted in the 80s I don't want it looking like a modern paint job all super smooth and mega shiny just a factory 80s finish

                                                                                  %d comments

                                                                                    I put some alley cat replicas from John brown wheels on my fiesta 1 1 1989 mk2... — Ford fiesta mk1 and mk2 owners forum

                                                                                    I put some alley cat replicas from John brown wheels on my fiesta 1.1 1989 mk2 meant for a mk2 escort at about 30 they are shaking they have been balanced anyone have any ideas alloys are brand new below are the sizes am I missing something?..

                                                                                    SIZE: 6 X 13

                                                                                    PCD: 4 X 108

                                                                                    OFFSET: 16

                                                                                    CENTRE BORE 67.1

                                                                                    %d comments

                                                                                      Photos from Wee Waldo's post — Ford fiesta mk1 and mk2 owners forum

                                                                                      Here we have my mk2 fiesta 60,000 miles 1.1 on the log books with a xr2 1.6 cvh engine runs a drives great a bought this 9 months ago with intention of putting a 2.0 black top engine in it but it's sat in my unit since a bought it,, it has full roll cage front to back,, two buckets seats with harness,, lowered and xr2 exhaust. The mot run out in November, car comes with two brand new wings and a brand new front panel the price is £1000 with no offers,,, ma also selling a mk 1 fiesta too car is in Fife Scotland ky8

                                                                                      %d comments

                                                                                        Photos from Marc Nixon's post — Ford fiesta mk1 and mk2 owners forum

                                                                                        MK1 Fiesta Parts

                                                                                        Fog light with gasket don't think it's a Mk1 gasket £15

                                                                                        Fog light shell £5

                                                                                        Early Mk1 fog light (I think) £15

                                                                                        Aftermarket chrome mirrors £20 pair

                                                                                        1.1 rad hoses £15 pair

                                                                                        Steering column cowling £25

                                                                                        Mk1 water pipe £20

                                                                                        Xr2 switch panel £10

                                                                                        Radio panel cracked free

                                                                                        Reverse light £10

                                                                                        Dash vent £5

                                                                                        Indicator/ horn stalk £10

                                                                                        Wiper/lights stalk £10

                                                                                        New ignition coil £20

                                                                                        1.1 brake callipers discs/pads £30

                                                                                        1.1 carb and inlet would probably need a rebuild £20

                                                                                        Fuse box £10

                                                                                        1.1 thermostat £10

                                                                                        Rear arches £20

                                                                                        Bonnet

                                                                                        %d comments

                                                                                          So the fiesta is all done new paint job new wheels running sweet and serviced... — Ford fiesta mk1 and mk2 owners forum

                                                                                          So the fiesta is all done new paint job, new wheels, running sweet and serviced, mot and taxed, any idea of what the value of this is? it's completely rust free 1.1 poplar lowered with cherry bomb remake exhaust, have no idea what to insure it for and been also had a few offers to sell it but no idea what it's worth.

                                                                                          %d comments