Dan Bint shared his event to the group: Ford Sierra Owners Group.

the next episode of our retro motors northeast meet is this monday coming up hope to see some of you guys there we usually get about 60-100 cars and a very good mix from rolls royce to ferraris to maestros its such a cool meet up and every body is so friendly so pop along and say hello thanks dan

https://m.facebook.com/events/1664443467194921?aco ntext=%7B%22ref%22%3A%222%22%2C%22ref_dashboard_fi lter%22%3A%22hosting%22%2C%22action_history%22%3A% 22[%7B%5C%22surface%5C%22%3A%5C%22dashb oard%5C%22%2C%5C%22mechanism%5C%22%3A%5C%22surface %5C%22%2C%5C%22extra_data%5C%22%3A%7B%5C%22dashboa rd_filter%5C%22%3A%5C%22hosting%5C%22%7D%7D]%22%7D &aref=2&arefdashboardfilter=hosting&ref=bookmarks< /p>

%d comments

getting the recall done on my 2015 Escape for the door latch

getting the recall done on my 2015 Escape for the door latch.

Did anybody else get this recall done, if so which door latch is it?

The dealer said it would take all day, my wife had the oil changed and had the 5,000 mile checkup today, but service said to do the latch she'd have to leave all day.

But we also got to take the maintinance plan on this car, like i got for both my new cars.

We don't have to pay for oil changes and brakes, i thought u could only get it when buying a new or used car, but no got it on my 15.

And the warranty onbthe car is good till 2021 or 75,000 miles which ever comes 1st.

%d comments
  • Ok TY

  • Cars
  • Welcome

  • Got mine done the other day said 4-6 only took 3 and got new wiper blades too

Photos from Josh Barnes's post

I'm still interested in trading for a clean, lower mile truck.

2001 Mustang Bullitt w/ 2004 Cobra ( Terminator) motor

-45k miles on car/35k on motor

-Swap/tune done by Kurgan Motorsports 11/2015

-Dyno numbers are 463/488 to the wheels

-2.8 SC pulley

-Billetflow pullies

-Eibach sportline springs

-Alpine navigation w/ backup camera

-03/04 Cobra hood

-18x9/10 staggered AFS Mach 1 wheels (Brand new as of 4/7/2017)

-Toyo Proxes T1 Sport tires 255/40-18, 295/35-18 (Brand new as of 4/7/2017)

Southern vehicle all it's life with a clean history. I am the 4th owner and the 2nd owner had the swap done. Title in hand.

Trade value $16,500

Located in McDonough, GA

%d comments
  • Nice cobra swapped bullet . Clean car brother .

  • Adrian Campos

  • Thanks

NEED HELP I keep trying to save my datalog for my wideband reading with my SCT...

NEED HELP!!! I keep trying to save my datalog for my wideband reading with my SCT X4, I have went into my SCT X4 and changed over my gauge display to Analog 8 which is my orange and changed to the measurement of units to from volts to the preloaded AEM setting that is already saved to my SCT X4. I can do my datalog and watch the Analog 8 display on my SCT X4 and it matches my AEM Wideband while I am driving. But when I transfer the datalog from my SCT X4 to my laptop it keeps converting it back to volts. How the hell do i fix this so I can finish getting my truck tuned with my tuner?

%d comments
  • Do u have a DC to AC invertor? Just trying to figure out how to bring your laptop with since sct cant help with the actual device.

  • Ask for Johnny Johnson let me know if he cannot help you

  • That's was my next move lol

1987 Ford Bronco 2 and 1984 parts B2

Moving and must sell unfortunately. I have a 1987 Bronco 2 with a 4.0 already installed. Lift kit installed on 33 tires. A lot of new parts installed - clutch (4.0), starter alt. All that is needed to get it running is finish installing engine harness and dash system(parts included. Also comes with '84 B2 parts bronco. Make offer.

1987 Ford Bronco 2 and 1984 parts B2

$1 - Moriarty, NM

Moving and must sell unfortunately. I have a 1987 Bronco 2 with a 4.0 already installed. Lift kit installed on 33 tires. A lot of new parts installed - clutch (4.0), starter alt. All that is needed to get it running is finish installing engine harness and dash system(parts included. Also comes with '84 B2 parts bronco. Make offer.

%d comments

    Valentine One V1 Radar/Laser Detector

    PRICE IS FIRM !!!! THIS IS THE BEST DETECTOR AVAILABLE!!! Has paid for itself many times over in avoiding speeding tickets

    Brand: Valentine One

    Model: V1

    Alert Type: Audio/Visual

    Features: Mute Mode, Signal Strength Monitor

    MPN: V1

    Detection: K Band, Laser, Ku Band, X Band, Ka Band

    UPC: 978465378494

    Product Information

    With the Valentine One radar detector, you can enjoy thrilling speed and know just when to slow down. Featuring multiple antennas, this V1 radar detector effectively warns you regarding the band and strength of the radar signal, along with the number of radar units detected. With X, K, Ka and Super Wideband Ka detection, the Valentine One offers valuable protection. Moreover, this radar detector is designed to recognize and ignore phony radar signals from poorly-made detectors with a different warning tone. With the ability to track multiple targets and inform you when you have passed one, this V1 radar detector is just what to need to drive with ease.

    Product Identifiers

    Brand Valentine One

    Model V1

    MPN V1

    UPC 978465378494

    Key Features

    Detection Mode City / Highway modes

    Alert Type Audio/Visual

    Detection Type K Band, Ka Band, Ku Band, Laser, X Band

    Detection Area Front / Rear

    Miscellaneous

    Mute With Mute

    %d comments

      Derale dual electric fans with thermostat wiring and mounting hardware

      Derale dual electric cooling fans for 1986-93 mustang.these fans are no joke they are 4,000cfms each. Fans that consider themselves "performance" are 1800-2800cfm.this fan kit comes with all the wiring mounting hardware thermostat and sending unit and has a sealing shroud.This kit is brand new never been used. Im a little flexible on price. please dont ask unless your interested.i also have a set of tritrickflow aluminum valve covers brand new for foxbody....100$ and a set of trickflow underdrive blue anodized aluminum pulleys brand new... 60$ ...call or text to 910-550-7016 my name is paul...box is jacked up in the pic but stuff inside is flawless..thanx

      Derale dual electric fans with thermostat wiring and mounting hardware

      $250 - Coats, NC

      Derale dual electric cooling fans for 1986-93 mustang.these fans are no joke they are 4,000cfms each. Fans that consider themselves "performance" are 1800-2800cfm.this fan kit comes with all the wiring mounting hardware thermostat and sending unit and has a sealing shroud.This kit is brand new never been used. Im a little flexible on price. please dont ask unless your interested.i also have a set of tritrickflow aluminum valve covers brand new for foxbody....100$ and a set of trickflow underdrive blue anodized aluminum pulleys brand new... 60$ ...call or text to 910-550-7016 my name is paul...box is jacked up in the pic but stuff inside is flawless..thanx

      %d comments

        Photos from Jason Barnes's post

        LIGHTNING PARTS FOR SALE

        - Located in Toronto, Ontario, Canada (willing to meet if not too far); prices in USD

        - Door panels - $175 for the pair (no shipping)

        - complete differential with 3.55 gears, axles, etc (no sway bar) - $350 (no shipping)

        - 99/00 rims, no curb rash but the machine indented it in a couple spots; the inside lip is worn from rubbing but still holds air no problem (tires just removed) - $175ea shipped or $300 shipped for the pair shipped

        - carpet (no rips or tears, could use a cleaning)- $100 (no shipping)

        - seats (passenger is dirty and driver has typical wear area) - $300 (no shipping)

        - heat exchanger bracket - $60 shipped

        - dash bubble - $50 (prefer not to ship but could get quote)

        - black driver front fender (nice) - $100 (no shipping)

        - black hood - has scratches - $60 (no shipping)

        - 99/00 Radio and Behind seat CD changer - $80 shipped

        - stock jack (never used) - $60 shipped

        - Glovebox - $75 shipped

        - under dash trim with pocket (a couple small holes were drilled in pocket) - $75 shipped

        - 99/00 tail lights - $60 shipped

        - Tailgate plastic strip, great shape - $60 shipped

        - Brand New Emissions Decal - $5 shipped, $2 for each additional

        - Brand New OEM A/C Compressor - $130 shipped

        - many other stock interior trim pieces (just ask)

        %d comments
        • Only parts i have are what's listed

          Sorry

        • Need the cover for the overhead box not the sunglasses one please

        • Sold sorry

        2011 honda cbr250r

        Iv always had a mustang and I want to be able to be in one again so i Wonder if there's anyone who is willing to do a trade for this bike...? It's worth a try.... looking for 2001 to a 2004 gt body style. ..maby a 95 to a 98 model as well

        2011 honda cbr250r

        $3,500 - Clinton, NC

        Iv always had a mustang and I want to be able to be in one again so i Wonder if there's anyone who is willing to do a trade for this bike...? It's worth a try.... looking for 2001 to a 2004 gt body style. ..maby a 95 to a 98 model as well

        %d comments

          85 mustang gt t-top project

          85 Mustang gt t-top, automatic transmission. I bought the car to restore but don't have time to work on it. Car is pretty much ready to be stripped down and ready for paint. The interior of the car has been removed with a lot of new parts to put back in. The interior is canyon red, Halo seats with new cushions and covers which needs to be installed, new dash pad, t-top headliner, carpet, sunvisors. Has a couple rust holes in floor that I was going to have repaired and also typical rust hole under battery tray, have piece to repair just haven't done it. Has a rebuilt Holley carb, never put on car since I had plans to remove motor to freshen it up while car was being repainted. Asking $2500.00 with all the new parts I have, new and old.

          %d comments

            2008 gt premium

            2008 mustang gt / 107,000 miles/ runs and drives great

            Mods: • eibac lowering springs

            • maximum mitorsports caster camber plates

            • kandn air filter

            •hurst shifter

            • pypes mufflers

            •jba off-road x pipe

            • window louvers

            •decklid pannel

            • Bama performance tuned , will pass inspection

            •saggy doorpannels have been fixed with the sve door panel repair kit

            THE BAD/ •charging system light is on bc wires connecting to alternator need to be cleaned

            • bumper cover needs to be touched up

            •passenger side fender has a scratch on it

            %d comments
            • .

            Photos from Bob Butchart's post

            Galaxie and other Ford owners. For some of you that live in the USA you might not be familiar with these Canadian models. I happen to have a 1961 sales brochure of the Canadian 1961 Meteor. They are basically a Ford. They have different front and rear design. Interiors were slightly different from Ford. The wagons on the rear have same tail lights as Ford. All power train and options were same as Ford. Meteor had the Montcalm 2 & 4 Dr hardtop, sedan and convertible. There were the lower price models, Rideau 500 2 & 4 door sedans, and just the Rideau models in the lower priced field. Enjoy the pics. These are very, very rare cars today.

            %d comments
            • Thanks, very interesting. I wonder why Ford spent the bucks to make Canadian cars different.

            • The full size Meteor was a slightly up scale model of the Ford, and for the slight changes I guess costs were not a big factor at that time.

            Fox mustang 302 headers and catted h pipe

            BBK 1 5/8 shorty headers and BBK catted 2.5" H pipe. H pipe has provisions for the two O2 sensors plus a bung for a wideband sensor.

            The tail pipes were cut just past the flow master mufflers, however they are repairable. Tailpipes are for a GT.

            $300

            Fox mustang 302 headers and catted h pipe

            $300 - Kenly, NC

            BBK 1 5/8 shorty headers and BBK catted 2.5" H pipe. H pipe has provisions for the two O2 sensors plus a bung for a wideband sensor.

            The tail pipes were cut just past the flow master mufflers, however they are repairable. Tailpipes are for a GT.

            $300

            %d comments

              83-90 mustang convertible parts

              Convertible frame for 1983-90 mustang - $180.00

              1983-1990 OEM Ford Mustang convertible arm assembly driver side (LH). $60.00

              1983-1990 OEM Ford Mustang top frame(piece that bolts to the car) - Driver side(LH) - part number E3ZX-7653138-AA - $75.00

              1983-1990 OEM ford mustang top frame(piece that bolts to the car) - Passenger side(RH) - part number E3ZX-7653139-AA - $75.00

              Black Mustang convertible interior rear quarter panels, came off an 85 convertible but may fit other years. Selling them as a pair. Hole cut in each panel for a roll bar/styling bar. Other than the holes that were cut the panels are in good condition. Asking $35.00 for the pair.

              Canyon red door armrests - $40 for pair

              Power control lock window switches - excellent condition - $40.00

              Power control lock window switches - chrome flaking - $25.00

              Power door lock switches - $40.00 for the pair

              Canyon red Rear passenger armrests - $25.00

              Black sunvisor brackets and rods for Vert car, driver and passenger - $20.00

              Driver/passenger side sunvisor with brackets and rods for vert (canyon red) - $40.00

              Rear seat convertible window glass (driver and passenger side) - $50.00

              Convertible 1/4 window manual regulators - $40.00

              1/4 window guide rods -$25.00 for set

              Convertible top switch - $15.00

              Trunk lid hinges/springs - $30.00

              Prices do not include shipping or Paypal if applicable. Located Wendell, NC.

              %d comments

                79-93 mustang parts

                79+ parts

                Clutch pedal assembly - $80.00

                80-93 driver side Window regulator w/motor - $40.00

                Instrument cluster trim panel - $25.00

                Tilt steering column with key - $60.00

                Steering wheel with cruise buttons -$40.00

                Hood latch and release - $30.00

                Stock upper/lower rear control arms - $30.00

                79-90 wheel well plastic liners (drive and passenger side) - $80 for set

                rear bumper support -$50.00

                Hatch back Headliner, non sunroof/t-top car - $40.00

                85-86

                Windshield wiper motor and transmission - $40.00

                White Side mirrors - $60.00

                Canyon red door armrests - $40.00 a set

                Gas tank brackets w/shield - $25.00

                Map light (1 red) - $30.00

                Vert door gaskets - $25.00

                Driver/passenger side interior a-pillar covers - $30.00

                Front fender moldings(both sides, total of 4 pieces) - $40.00

                Steel Front bumper support, includes parking lights- 40.00

                4 piece headlight retainer rings - $40.00

                Glove box - $25.00

                Fuel door (qty. 2) - $20.00 each

                Hatchback interior 1/4 panels - $50.00 pair

                Fuel filler neck - $35.00

                Headlight switch - $25.00

                Chrome windshield and side window trim - $40.00

                Hatch gasket - $20.00

                Passenger side door gasket - $20.00

                Fog light switch - $25.00

                87-93

                87-89 Lx Instrument cluster - $40.00

                Blue arm rest - $15.00/pair

                Used Clutch/flywheel $75.00

                Prices do not include shipping or Paypal if applicable. Located Wendell, NC

                %d comments

                  SVE mustang Seats

                  PRICE IS FIRM Seats are not faded or stained, driver side bolster on the outside has a 1in small tear from something during shipping but is hardly noticeable and could easily be fixed. Going back with stock seats in my car so no longer need these. They will fit 79-04, they recline and come with sliders and mounts. I can meet you with them in lake city, SC or kingstree, SC.

                  SVE mustang Seats

                  $250 - Kingstree, SC

                  PRICE IS FIRM Seats are not faded or stained, driver side bolster on the outside has a 1in small tear from something during shipping but is hardly noticeable and could easily be fixed. Going back with stock seats in my car so no longer need these. They will fit 79-04, they recline and come with sliders and mounts. I can meet you with them in lake city, SC or kingstree, SC.

                  %d comments
                  • can you meet me in Florence tomorrow ?? or in Effingham ?

                  • I work tomorrow and for this price I can meet in kingstree and that's it, otherwise I'd have to charge delivery

                  • Trey Mcclary ill throw you 20$ in gas ill do 270 lmk

                  I replaced the front driver s side window regulator a month ago with a Dorman...

                  I replaced the front driver's side window regulator a month ago with a Dorman aftermarket one. It mostly fit (bulges out the inside door handle a little but other people had this problem, too) and fixed my issue. But now I'm hearing a bit of a "thunk" sound every time I roll up my window. As if the window could be re-seating itself into the clips.

                  The Expedition uses these little clips (pic below) that attach to the regulator. The window seats itself inside of them and is held in with window adhesive (I used 3M Window-Weld), instead of the much better option of having the window have holes that bolt to the regulator securely.

                  Do you think the glue isn't on there strong enough and it's re-seating itself? Or is it possible that this aftermarket part has already started to fail and getting off track?

                  %d comments

                    Hi lads

                    Hi lads

                    Just wondering if anyone has any idea where to start with my 96 302 all stock basically..

                    It misses while under light load.

                    Splutters about 6 or so times then goes. Power feels like it cuts 100% for split second each miss.

                    Cold starts have been a issue for a while now i might add also, and time to time idles with a lope

                    Have just replaced spitfire plugs and eagle 9mm leads, cleaned button and cap, all in okay condition, button could be replaced tho. Just done fuel filter again. New vac hose under manifold.

                    The 02 sensors have not been done but unsure if they would cause this..

                    I dont have a gauge to check fuel psi.

                    What would be best to buy first, start with fuel pump then 02's,

                    Then do cam sensor and other sensors?

                    Thanks

                    %d comments

                      mazda b2600

                      I have a 1998 Mazda bravo for sale

                      Good

                      Opposite lock bar

                      Front flares

                      3 inch stainless snorkel

                      Tow bar

                      2 inch body lift

                      Safety imobisler

                      4wd components all work great

                      Bad

                      Will be sold no rego or rwc

                      Has chips in windscreen

                      Cracked front left indicator lense

                      Will have crappy mud tyres on it

                      No stereo

                      No a/c

                      Has surface rust

                      Passenger sige door lock is not connected to rod so can't be opened by key

                      Back passenger door hinge doesn't work

                      Would take a bit to get back on the road or use as a bush car

                      I have a 1998 Mazda bravo for sale

                      Good

                      Opposite lock bar

                      Front flares

                      3 inch stainless snorkel

                      Tow bar

                      2 inch body lift

                      Safety imobisler

                      4wd components all work great

                      Bad

                      Will be sold no rego or rwc

                      Has chips in windscreen

                      Cracked front left indicator lense

                      Will have crappy mud tyres on it

                      No stereo

                      No a/c

                      Has surface rust

                      Passenger sige door lock is not connected to rod so can't be opened by key

                      Back passenger door hinge doesn't work

                      Would take a bit to get back on the road or use as a bush car

                      %d comments
                      • B

                      • Mick Gibson

                      Front end is wondering any ideas Are we talking steering box or front end...

                      Front end is wondering... any ideas?? Are we talking steering box or front end parts?? It's getting worse and the set-up hasn't changed... getting uncomfortable to tow, feel like I'm fighting for control.

                      Here's her specs: Blue Ox weight distribution and sway control, Firestone Bags at 55psi (everything is level), Michelin LTX a/t2's 60psi front/75psi rear, stock suspension, new OEM rear shocks (fronts may be original?). 2005 diesel, trailer is about 10k with about 900lb tongue weight. Thanks in advance!!

                      %d comments

                        Looking for qualified diesel mechanic

                        Looking for qualified diesel mechanic

                        Diesel Mechanic

                        Big Wheels Truck Alignment Dandenong - Dandenong VIC

                        Qualified Diesel Mechanic - sought for a busy workshop, located in Dandenong VIC.

                        Employment Full time Monday to Friday (some Saturday work available).

                        Applicants should have experience in a broad range of repairs to all heavy commercial vehicles, we cater for 4WD's, Light, Medium and Heavy Truck & Bus as well as All trailer combinations.

                        We seek to employee a competent all-rounder, who is able to work autonomously, with a focus on Safety and Customer Service. Our business prides itself on fixed right first time, and efficiently returning a customers vehicle back to service.

                        HR Truck Licence or ability to obtain one will be viewed as advantageous, this will be a prerequisite of employment and must be maintained ongoing.

                        Wages are negotiable for the successful candidate, with some overtime available.

                        Our businesses focus on retention of our staff, we value our employees they become like family to us! We have very little staff turnover as a result.

                        So come and be a part of our team. please submit your resume with contactable referees via email and we will be in touch as soon as it is received.

                        Good luck with your application

                        Job Type: Full-time

                        Required experience:

                        * Diesel Mechanic: 4 years

                        * Customer Service: 4 years

                        Job Type: Full-time

                        Required experience:

                        * Diesel Mechanic: 4 years

                        Required language:

                        * English

                        Required licence or certification:

                        * HR

                        %d comments

                          Photos from Robert Baker's post

                          I know I know (delete if not aloud ) but once again no help from the Chevy groups. (Will post a pic of my expedition, because it's a Ford) judging but the only cylinder filled with water , and the plug if I got a bad head or head gasket?...... I ran it for a min without the plug and disconnected the fuel injector, then put a bore scope down in the cylinder gain and (that's the video) it looks wet .......

                          Now here's I kicker , if I let it idle it will never heat up ( and I let it run at idle for 4 hours ) I can drive around for hours and it won't over heat . But sometime it will over heat in about ten miles ) I am losing coolant but heater core is good and no leaks on the ground, this is the last time I bother you guys with this turd of a Chevy ,

                          %d comments

                            2004 ford courier 4x4 2.5 TD

                            Hey guys,

                            Will be selling my courier soon due to getting work vehicle. Low Ks - just hit 180,000 - professionally re co'd gearbox, new clutch, serviced every 5k while I've had it and 10k before that, 50mm suspension lift, snorkel, toolboxes, electric brakes, almost new BFG all terrain 31s, doesn't blow smoke, very honest and reliable old girl. Needs a rip in drivers seat fixed and replacement toggle on tray side for Roady.

                            Open to offers but nothing ridiculous.

                            Please note I may be removing uhf antenna.

                            Cheers

                            %d comments

                              1995 Ford F-150 Lightning

                              Selling my dads 1995 Ford F-150 Lightning for him as he does not have Facebook. 114k miles CLEAN not a spot of rust on the truck. Has aftermarket bassani exhaust, stereo, ram air hood, bed liner, and probably a few other small things I'm forgetting. No dents or scratches truck was repainted a few years ago. Bought in Michigan but was originally a Georgia truck if I remember correctly. Selling since it only sits in the garage and need room for next project. Pm me with other questions. Don't even try to lowball, he won't take 5k for the truck so save the time of asking. I can get more pictures if you are serious but I don't have many right now.

                              %d comments
                              • Lol why u always into my comments

                              • Clean car, but I'll think about it

                              • Buy this one and paint it red

                              Here we go. Decided that if my ranger transmission dies in me I will do a 5

                              Here we go. Decided that if my ranger transmission dies in me I will do a 5.0 swap. Yep it's been done so many times. But my point of this is transmission talk. I want to keep it a stick shift. That's the main reason I like the truck. I looked it up it said a t5 outta a mustang will work. So that would mean I wouldn't need to cut my floor at all to fit in the shifter and would I have to change the clutch petal at all? And I'm also wanting to have fuel injection. But I want to stick with obd1. And info is nice and yes I've looked it up. I know what I'm getting into kinda.

                              %d comments
                              • Thanks to you all. I'll put a post up and keep on looking for parts

                              • Lol hope that is just a filler before the main course.

                              • Click on the pinned post in the v8 group. If your answer isn't there. You most likely won't find it lol

                              What s the best way to deal with stale gasoline Not in an excursion but you...

                              What's the best way to deal with stale gasoline? Not in an excursion but you guys seem smart.

                              It is from a boat I bought that sat for 12 years prior to me getting it. I pumped it all out when I got it. Filled it with 20 gallons of e10 mixed with alcohol. Rigged a junkyard fuel pump into a pressure canister on my air compressor and used the alcahol fuel mix to clean the varnish/chunks from tank.

                              Then I drained and filled it maybe 20 gallons of e10 fuel again. I figured it would mix with the shit in the tank. Im running it through 2 water seperators and an in line filter here is the gas that I'm still getting pictred. Should I just drain,fill then run it?

                              Left sat for 3 days right is from the water seperators right after running it

                              %d comments

                                Just a heads up folks I got kicked out the group last night because one of the...

                                Just a heads up folks, I got kicked out the group last night because one of the admins is sensitive. I have no clue which one, nor do I really care. The admin I spazzed out on last night added me back to the group when I requested again, though, for whatever that's worth.

                                I'm posting this to tell everyone else that if you upset one of them, you might be next. All I do is ask, a community of folks that have the exact same vehicle as myself, questions about that vehicle. And without fail there's always one or 2 people that come comment some BS that doesn't help me at all. And it's not just with my posts.

                                "There are threads about this, go Google it"

                                "Go check lightningrodder"

                                "This question gets asked at least 3 times a week"

                                Etc

                                Ok, and? I clearly didn't ask about that. If you know the answer, post it...if you don't then move along and sit down somewhere. If you don't feel like answering, simply don't. I didn't ask "how do I Google this issue so I can read 4 dead end threads before I find one that MIGHT help when I could just post here and someone will reply in real time?" I specifically came here because I know for a fact someone else has had the same, or similar, issues and can help me out better than Google can right now. I don't care for the obviously sarcastic and troll comments, go to someone else's thread with all that nonsense. And if I get banned again, thanks to all of helpful folks here, I'll see you on the road...then again, this will be deleted before you can read it lol.

                                PFA/LMS/KMSL

                                %d comments
                                • Censor*

                                • No one makes me bleed my own blood!

                                • Don't be gay

                                Just a heads up folks I got kicked out the group last night because one of the...

                                Just a heads up folks, I got kicked out the group last night because one of the admins is sensitive. I have no clue which one, nor do I really care. The admin I spazzed out on last night added me back to the group when I requested again, though, for whatever that's worth.

                                I'm posting this to tell everyone else that if you upset one of them, you might be next. All I do is ask, a community of folks that have the exact same vehicle as myself, questions about that vehicle. And without fail there's always one or 2 people that come comment some BS that doesn't help me at all. And it's not just with my posts.

                                "There are threads about this, go Google it"

                                "Go check lightningrodder"

                                "This question gets asked at least 3 times a week"

                                Etc

                                Ok, and? I clearly didn't ask about that. If you know the answer, post it...if you don't then move along and sit down somewhere. If you don't feel like answering, simply don't. I didn't ask "how do I Google this issue so I can read 4 dead end threads before I find one that MIGHT help when I could just post here and someone will reply in real time?" I specifically came here because I know for a fact someone else has had the same, or similar, issues and can help me out better than Google can right now. I don't care for the obviously sarcastic and troll comments, go to someone else's thread with all that nonsense. And if I get banned again, thanks to all of helpful folks here, I'll see you on the road...then again, this will be deleted before you can read it lol.

                                %d comments
                                • Do you know what drop you have Joseph?

                                • I know you're probably still touchy and upset over the raiders moving to LV, but you've got to loosen up your britches a little work this group.

                                  If you don't tell people details about your question with suspension, is no different than asking someone how much power your truck will make with a picture of the radio attached

                                • He did.

                                  He posted a pic.

                                  Said he saw bilsteins and nothing else. Wanted to know his drop.

                                  I proceeded to tell him the bilsteins were stock and examined everything else would be speculation.

                                  He didn't like that. He got sensitive.

                                Just a question like that Did someone have problem with is Ecoboost Like miss...

                                Just a question like that.. Did someone have problem with is Ecoboost?? Like miss fire at cold. Miss power and a rough idle?? I bring 3 times at the dealer with this complain and they didn't found nothing. I order my intake gasket kit and i do the job by my self( take a lot of pictures to) i found oil in the intake header, ETV, and a lot of carbon built up around the intakes valves and my cyl. #4 was the worst.. It take me about 6 hours to clean cyl. by cyl. Turn engine by hand to close valves and apply Choke and Carb cleaner. Brush and remove with shop vac( make a home made adaptor to go in the intake port) . It's funny now, i have no more problem with the engine now. ( did is good to install a Oil Catch Can for a open breather service??? Some on do that modif? Sorry for that big story but i want to know if i m the only one. Thats not normal to have this issue with a 2014 ( 54000 km)

                                %d comments
                                • I know on Youtube, he said only one type of oil is good but didn t found here in quebec, Montréal. Seem to be only sell in USA

                                • Yes, it is a common problem for all direct injection engines. It is because of the Exhaust gas and crank ventilation that is fed back to the intake manifold. Fit an oil catch can. It will help

                                • Thanks. And dont worry, i know exactly whats is the probleme due to turbo. Pressure crankcase is high.

                                Delete if not allowed

                                Delete if not allowed.

                                Hey guys non L question.

                                94 f150 5.0l 2wd aode 263,xxx. Unmolested completely stock besides accel coil and street fire cdi box. So a mile from home the engine dies. I had commuted 30 miles more or less back home from work and hour drive in traffic. Well I pull over and immediately check for fuel pressure,and spark. Fuel is good. No spark from coil, replaced the accel coil back to oem. Still no spark so I for some reason pull the distributor cap and to my surprise the metal conductor on the rotor is broke off and I can't find it. Haven't messed with it too much after that waiting for he weekend.

                                I disconnected the distributor plug from harness to rule out a false/dirty connection. That is when the coil sparked. At this time I had already put the accel back and checked the oe coil for spark by undoing the connection on the distributor. They both fired everytime.

                                So with that basic troubleshooting can i rule out the ignition control module? I am honestly thinking it is the pick up coil that was damaged by the metal conductor.

                                Why does the coil fire when unplugging the dizzy?

                                I removed the street fire cdi box out of the equation. Same results with stock and aftermarket ignition.

                                %d comments

                                  Attachment Unavailable

                                  Come on come on come on, 2 days to go is MSL-Blue oval day event hosted by fordmania and performance blue owners club. There is a lot to do such as detailing stalls, food stand, gel badges, rolling road, tuning companies and much more. Get this in your calendar and get sharing

                                  This is a ford exclusive event only. Other vehicles are welcome but please keep towards the end of the road as the bottom will be for fords ONLY

                                  we also have a full detail package that will be given away to one lucky prize winner, terms will be announced on the day

                                  https://www.facebook.com/events/783818365100894/?t i=icl

                                  %d comments

                                    Help! Fiesta ST!

                                    Hi guys! Just needing some help with my mk6 st 2005. It's overheating on the dash and when opening the bonnet I see the water is boiling it's tits off, when it cools down it's still between the min-max label and also the heaters don't blow hot air? Any ideas???

                                    Hi guys! Just needing some help with my mk6 st 2005. It's overheating on the dash and when opening the bonnet I see the water is boiling it's tits off, when it cools down it's still between the min-max label and also the heaters don't blow hot air? Any ideas???

                                    %d comments
                                    • Thermostat

                                    • engine fin work ??

                                    • Water pump got same problem as mine their onyx about 25 quid

                                    Cobra parts

                                    Up for sale i have some parts off of my 97 cobra car is runing with a slight knock can see and hear run before are is pulled apart

                                    1.cobra t45 trans shifts perfect no problems rive before u buy 600 firm

                                    2 teksid block complete slight knock can hear run 350

                                    3. 97 cobra heads can hear run 600 complete heads

                                    4. 97 cobra bare intake manifold 350

                                    5.97 cobra 4v engine harness 200

                                    6.tan sn95 convertable interior trade for tan

                                    7. 94 gt 5.0 stock upper and lower intake manifold and throttle body 75

                                    Call or text 864-494-0023 or 864-461-2520

                                    Cobra parts

                                    $10,000 - Chesnee, SC

                                    Up for sale i have some parts off of my 97 cobra car is runing with a slight knock can see and hear run before are is pulled apart

                                    1.cobra t45 trans shifts perfect no problems rive before u buy 600 firm

                                    2 teksid block complete slight knock can hear run 350

                                    3. 97 cobra heads can hear run 600 complete heads

                                    4. 97 cobra bare intake manifold 350

                                    5.97 cobra 4v engine harness 200

                                    6.tan sn95 convertable interior trade for tan

                                    7. 94 gt 5.0 stock upper and lower intake manifold and throttle body 75

                                    Call or text 864-494-0023 or 864-461-2520

                                    %d comments
                                    • Bump to the top not one single hit

                                    Curious as to what I could get for my 99 XLT 5. 4l extended cab with 123 000mi

                                    Curious as to what I could get for my 99 XLT 5.4l extended cab with 123,000mi. I replaced front wheel bearings, all COP's and spark plugs, flushed transmission and replaced filter as well as replaced fuel filter. New brakes all around. Changed fluid in both axles. I also resealed the rear window as it began leaking last month but hasn't since the repair. 4 wheel drive is perfect. Transmission is smooth. Engine runs amazingly. Inspected til 05/18. Overall the body is in what I would call fair condition. Rockers could use a little work but aren't rusted through. The only bad things with the truck is the power locks don't work and the center buckle in back seat is broke. There is a dent above drivers side wheel well but paint isn't scratched. (May try to get that popped out) AC is weak but works.

                                    %d comments
                                    • Probably around 1500 bucks ur better off keeping it

                                    • Depends​ on where you live and who's interested in it around here in PA some are going up to 3000 in decent shape

                                    FOR SALE 03 Harley Davidson F150 100th Anniversary Edition 75 300 miles

                                    FOR SALE - 03 Harley Davidson F150 100th Anniversary Edition, 75,300 miles. 5.4L, Leather, Sunroof, Power rear window, Stiegemeier Stage 6 Ported Supercharger, Ported upper plenum, Lightning upper pulley, 8# lower pulley, AFE Air intake, SCT tune, Single blade throttle body, Electric fan, Trans valve body with Moroso deep pan, 435 RWHP / 490 TQ, Rear lowering shackles, Bilstein shocks, Magnaflow exhaust & Hi Flo cats, Amsoil Synthetic fluids, HID driving lights, Snugtop bed cover, Kenwood stereo w/ NAV & backup cam, Rear flip down TV, 3/18 Va inspection, Pristine condition & adult driven. Virginia Beach Va $19,000

                                    %d comments
                                    • Trade

                                    • For?

                                    2002 ford escape xlt 3 0 v6 Update again so was checking out the escape...

                                    2002 ford escape xlt 3.0 v6......Update again...so was checking out the escape today..found that there was moisture down around the sparkplugs..went ahead pulled and replaced them put it back together cranked it still missing...so i put my hand on the number 6 coil to see if maybe it wasnt on all the way and ZAP it lit me up..took it back out had a crack in the side of the coil..so my stepdad had a spare from where they were replaced years ago put it in and alot better...still has a miss to it so next payday im gonna order new ones and put in and while ive got it apart gonna go ahead and do intake gaskets

                                    %d comments

                                      Where s the best place to find a good combo of parts for an engine build

                                      Where's the best place to find a good combo of parts for an engine build? I'm new to the SBF. Mine finally got it's death sentence today. Needs a bunch of gaskets and repairs that for the money seems like a better idea to just rebuild. I have a non roller block so I will probably start with a roller block. What's a good starting point that has a decent power bump for now that will work with speed density that I can add too later. I have about $3k to work with and want to build it myself. Swapped several long blocks and short blocks over the years but this will be my first ground up build.

                                      I'd like 300-350 at the flywheel to start and when I have the cash for a mass air swap I will go bigger. I don't want to go super cheap but I don't really need top of the line either. Going to be mostly a daily/tow rig for the mustang so I'd like to get a reasonable power gain in the process. Already have a tuner that can handle speed density so that's in place just need ideas what works well together in these trucks.

                                      Thanks.

                                      %d comments
                                      • You go to high the truck will work harder to move the weight 3:73 would be as high as I would go.

                                      • Yeah that's what I'm afraid of.

                                      • I already have the mustang that's boosted. I want to make this one N/A maybe in the future boost would be on the table.

                                      Wanted!!! Does Anyone Know Owner This Car Mazda 1800. Very Keen Want This Car Back

                                      This car used to be Mazda group for rally race and my father sold long ago since 2004-6 ish this and wishing to know if does anyone know who still have that car? And possibly offer to pay or any necessary deal

                                      Wanted!!! Does Anyone Know Owner This Car Mazda 1800. Very Keen Want This Car Back

                                      $123,456,789 - 3152

                                      This car used to be Mazda group for rally race and my father sold long ago since 2004-6 ish this and wishing to know if does anyone know who still have that car? And possibly offer to pay or any necessary deal

                                      %d comments

                                        2006 Chevy Tahoe LT Custom 5.3 with Bully Dog Performance Upgraded Computer Chip, To Much To List.

                                        Bully dog upgraded chip, Fast!!! Clean with custom lighting, light bar, KC lights, 2 tvs with dvd players, touch screen 7" stereo with amp and 12" sub. 180k on body new engine and transmission with 89,500 miles all documented with pictures of work being done, extremely well taken care of. 22" MOZ deal dish rims real deal not knock offs, cost over 3500 alone. Halo headlights, Western push bar 8000k blue HID's. And much more, over 12,000 well invested in this beauty. Asking 7000 OBO with possible trades welcome,

                                        %d comments

                                          Can anybody help me with what to do with my 94 Ford Lightning I live in South...

                                          Can anybody help me with what to do with my 94 Ford Lightning? I live in South Florida and would love for advice from somebody local.

                                          It is a low mile truck I have owned it since 2007 was in great condition when I bought and then I just let it sit in my garage for years. Took it out and drove it around and blew the the head gasket. Some one told to take out the motor and refresh it.... Took it out and lost all interest in it. Now it just sits under my carport. Really wish I could get some help with this.

                                          Thank you in advance.

                                          %d comments
                                          • Go to NLOC.NET and post this. You will get lots of help from members I your area..

                                          • Ship it to NJ.

                                          • so you want help getting it back together or is this a feeble attempt a "fur sail" post?

                                          I find myself all to often needing a truck and having to beg everyone i kno for...

                                          I find myself all to often needing a truck and having to beg everyone i kno for a truck or trailer and never get help so Im looking to trade my 2003 toyota 4runner with a 4.7l v8 4x4 with 115000 miles on it only thing wrong with it is radio dosnt work ..im shure that can be fixed for a 4x4 extended cab truck automatic transs and motor hopfully no bigger than 302 and $3000 cuz its what i owe on it...but still it is worth $8000 so someone should be interested im posting this anywhere i can to see if anyone would be interested if theres intrest ill post pictures

                                          %d comments

                                            Hey guys and gals i have a 2005 4 0 v6 petrol manual ford courier with 165 ks...

                                            Hey guys and gals, i have a 2005 4.0 v6 petrol manual ford courier with 165### ks on it. First problem is it drinks fuel (more than 23 liters per 100) it use to be half decent on fuel, what can be done to get better fuel?

                                            Second problem; 4x4 doesnt work, took it to ford and they cant find the problem. The lights on the dash flash all the time anyone know what the problem could be?

                                            Third problem; it revs at 2k rpmwhen first started and same when it is at running temp and wont idol below 1k rpm, anyone on here had the same problems? Tia. Pic of my ute

                                            %d comments
                                            • Sounds expensive.. might just stay a 2x4..

                                              When one is off the other is on and vise versa, they dont stop until i pull the fuses

                                            • William please post a video I have been waking here for someone to modify the 4.0 v6 I ant to hear so I know what mine will sound like!!!

                                            • Id look at electrics first

                                            f150s

                                            Hello all I have the opertuity for one or more people to own some fine pieces of automotive machinery. First one is a beautiful 1999 Ford F-150 ext cab 4dr standard bed 2wd it has the might powerful 4.2 v6 which is currently missing a water pump and wasn't put back together after hers was taken To let another f150 live it also needs a battery and since it's been sitting resting for 2 years the rest should be looked over. This fine gem I'm only asking 350.00 Obo it's located outside of Beaumont and have to talk to me to sceduale a look or anything. The other beauty is my daily driver a 95 Ford F-150 ext cab short bed 2wd xlt it's loaded up with options like power windows power locks power seats power sunroof yes power sunroof it's got a tree puller 5.8 auto and well it's body has seen better days it does run and drive and is currently registered so cus all this I'm asking 600.00

                                            %d comments
                                            • Tyler Cheyne

                                            • Danny Kirkpatrick check out the 95 man

                                            2007 1.25 zetec climate

                                            £700

                                            Available next week:

                                            2007 Ford fiesta 1.25 Zetec climate in blue.

                                            91,000 miles

                                            Will have around 3/4 fuel in the tank...

                                            ONE owner from new - my mother - this literally is the family car as my cousin sold it to her at the ford dealership!

                                            High spec for a runabout:

                                            Auto lights with front fogs

                                            Heated front screen

                                            Steering wheel controls

                                            Cd player with built in aux

                                            Dashboard display with MPG, distance to empty etc

                                            Metallic blue

                                            Air con

                                            Electric folding mirrors when you lock it

                                            2x keys with remote central locking

                                            Spare wheel in boot

                                            Auto windscreen wipers (flick to turn on auto wipers)

                                            Front electric Windows and electric mirror adjust

                                            Been service by myself september and serviced annually/ every 12,500 miles as per manufacturers guidelines

                                            Only issues I've ever had with this little gem is:

                                            The expansion tank cracking (replaced last month)

                                            Gearbox mount cracking (also replaced last month)

                                            Occasional squeak (this hardly happens on start up and goes within 5 mins probably the stretch belt)

                                            It has minor damage - a scratch on the bonnet, scratching to front bumper and minor damage to the N/S mirror which I may fix in the meantime - all fully functioning and road legal though.

                                            Mot expires in June though i can pretty much guarantee it will pass as I know this car extremely well.

                                            Have a look online a minter is £1500 - so I want £700 for it as it needs to go next week when the new car turns up.

                                            2007 1.25 zetec climate

                                            €700 - Gloucester, Gloucestershire

                                            £700

                                            Ava ilable next week:

                                            2007 Ford fiesta 1.25 Zetec climate in blue.

                                            91,000 miles

                                            Will have around 3/4 fuel in the tank...

                                            ONE owner from new - my mother - this literally is the family car as my cousin sold it to her at the ford dealership!

                                            High spec for a runabout:

                                            Auto lights with front fogs

                                            Heated front screen

                                            Steering wheel controls

                                            Cd player with built in aux

                                            Dashboard display with MPG, distance to empty etc

                                            Metallic blue

                                            Air con

                                            Electric folding mirrors when you lock it

                                            2x keys with remote central locking

                                            Spare wheel in boot

                                            Auto windscreen wipers (flick to turn on auto wipers)

                                            Front electric Windows and electric mirror adjust

                                            Been service by myself september and serviced annually/ every 12,500 miles as per manufacturers guidelines

                                            Only issues I've ever had with this little gem is:

                                            The expansion tank cracking (replaced last month)

                                            Gearbox mount cracking (also replaced last month)

                                            Occasional squeak (this hardly happens on start up and goes within 5 mins probably the stretch belt)

                                            It has minor damage - a scratch on the bonnet, scratching to front bumper and minor damage to the N/S mirror which I may fix in the meantime - all fully functioning and road legal though.

                                            Mot expires in June though i can pretty much guarantee it will pass as I know this car extremely well.

                                            Have a look online a minter is £1500 - so I want £700 for it as it needs to go next week when the new car turns up.

                                            %d comments

                                              2000 7.3L Ford Excursion

                                              *Little Rock Arkansas*

                                              2000 Ford Excursion with the 7.3 Powerstroke

                                              280,xxx miles (nearly all highway miles)

                                              Very sound mechanically

                                              Oil Changed every 3-5k Miles

                                              2 owner

                                              Clean Title

                                              Tires have decent tread

                                              -The Bad:

                                              Missing "limited" logo on drivers seat

                                              Needs bearing (front driver side)

                                              Starting to rust on passenger door (inside)

                                              Running boards starting to rust

                                              Will need brakes eventually

                                              12,500 OBO

                                              NO TRADES

                                              2000 7.3L Ford Excursion

                                              $12,500 - Little Rock Air Force Base, AR

                                              *Little Rock Arkansas*

                                              2000 Ford Excursion with the 7.3 Powerstroke

                                              280,xxx miles (nearly all highway miles)

                                              Very sound mechanically

                                              Oil Changed every 3-5k Miles

                                              2 owner

                                              Clean Title

                                              Tires have decent tread

                                              -The Bad:

                                              Missing "limited" logo on drivers seat

                                              Needs bearing (front driver side)

                                              Starting to rust on passenger door (inside)

                                              Running boards starting to rust

                                              Will need brakes eventually

                                              12,500 OBO

                                              NO TRADES

                                              %d comments

                                                Car Part. com

                                                Car-Part.com

                                                Have any of you had any success actually buying parts from any of the vendors listed on this site? I have sent at least a dozen requests for quote to vendors that list the black dash I am looking for. Most have photos posted. I include a note explaining exactly what I am looking for and requesting a quote for the part shipped to my zip.

                                                Of all of them, only one has even bothered to reply and the dash he had was brown even though the listing showed black. The others all just ignore the requests.

                                                What am I doing wrong?

                                                %d comments

                                                  98 f150 xlt

                                                  Needs motor i have origonal taken out is ready for the hot tank if ya wanna rebuild it. Everything else worked great. I have brand new wiper motor brand new power steering pump. Just needs motor or origonal rebuilt. Trans shifted perfect. Will need exhaust and windshield as well exhaust was shot and winshield is cracked. But i also just rebuilt front end has new wheel hubs both sides new pads and rotors new shocks and new upper control arms both sides as well. Only asking 700 obo need to move it. Will sell light bar on it seperate its brand new and hasnt ever been hooked up i just mounted it never turned it on has halogen bulbs. Its obo or trade. Thanks. 920 376 4305. Tires are 17s and in great shape as well.

                                                  98 f150 xlt

                                                  $700 - Ripon, Wisconsin

                                                  Needs motor i have origonal taken out is ready for the hot tank if ya wanna rebuild it. Everything else worked great. I have brand new wiper motor brand new power steering pump. Just needs motor or origonal rebuilt. Trans shifted perfect. Will need exhaust and windshield as well exhaust was shot and winshield is cracked. But i also just rebuilt front end has new wheel hubs both sides new pads and rotors new shocks and new upper control arms both sides as well. Only asking 700 obo need to move it. Will sell light bar on it seperate its brand new and hasnt ever been hooked up i just mounted it never turned it on has halogen bulbs. Its obo or trade. Thanks. 920 376 4305. Tires are 17s and in great shape as well.

                                                  %d comments

                                                    Need help Have a vibration that i thought was the wheel hub Changed both...

                                                    Need help! Have a vibration that i thought was the wheel hub. Changed both front assemblies. Still there. Comes after hitting a bump, goes away after another bump or stopping. Tie rods, ball joints, and u joints are tight. Took it into a shop no vibration at all during test drive, checked out everything and said they cant find anything wrong. What could be causing it? Its not felt in the steering wheel but the rest of truck shakes. 02 excursion limited 4x4 v10 181k miles.

                                                    Tires rotated, new brake pads, new front hubs. Doesnt do it all the time not speed related. All help is appreciated. I am stumped!

                                                    %d comments

                                                      That time of year is coming warm weather and my 92 ranger has the r12 a c...

                                                      That time of year is coming, warm weather, and my 92 ranger has the r12 a/c system and need a sloppy way to convert to 134a. I see I can buy fitting adaptors, ester oil is the way to go and the 134a refrigerant throw that in the system and I should be good to go, could it really be that easy? I'm not going for super cold I'm going for enough to beat the heat for my 2 mile drive to and from work. And I've done it before in a 92 Buick park Avenue I used to have hook a switch up to a relay so that the compressor is turned on forcefully by me if for some reason the controls don't want to turn it on.

                                                      %d comments
                                                      • Guess I'll be going to AutoZone at some point. Thank you for the help. Now to wait for this weird Indiana weather to stop being weird and maintain a constant temperature in the 70s so I can actually do this project.

                                                      • Doing the same here in Illinois as well. This weekend is going to be in the mid 70's

                                                      • Suppose to be 74 on Sunday here and mid 60s saturday. May go cut some wood Saturday afternoon, put the ranger to work.

                                                      I have a Odd question I have a 2008 Mazda Tribute with only 67 000 miles but my...

                                                      I have a Odd question, I have a 2008 Mazda Tribute with only 67,000 miles but my dad is giving me his 2012 Turbo Chevy Impala which has around 51,000 miles . I plan on keeping my Tribute as a weekend car and for hauling stuff around but does any one know of any groups similar to this for the Impala?

                                                      He have never had any issues with it except for a sensor in the transmission and warranty covered it, but its just nice to be able to ask actually owners for advice and maybe ideas on making the car "mine"

                                                      Thank you in advanced

                                                      %d comments
                                                      • I believe there is a page called W-Body enthusiasts. W-Body is the name of the platform, which is shared with Pontiac Grand Prix, Buick LaCrosse, etc.

                                                      • Huge aftermarket for those cars. You can do pretty much anything to them for somewhat cheap

                                                      Need some recomendations on air intakes Turns out the Donaldson Air Intake...

                                                      Need some recomendations on air intakes. Turns out the Donaldson Air Intake System with the spiral element filter cannot flow enough air to feed a GT38R turbo on a 7.3. Trips the filter minder and collapses the intake air hose as the turbo winds up. I need a less restrictive intake but would prefer one that filters well too for long life. Cost aside for the moment what are the best options for big air flow and good filtration? I don't mind needing to clean the filter even each oil change interval if necessary. I was looking at this AFE intake as a possibility but perhaps there are better options. None of the ones that are supposed to sit on top of the stock air box will work, I do not have a stock air box.

                                                      %d comments

                                                        05 xr6 low ks reg woft as is

                                                        6500 firm az needs side diff mount bushes done bit worn tidy car tho still drives fine reg woft low ks lowerd 19x10.5s allroind flaird gaurds done mint mint motor trans has a new lsd and axels plus heaps of other things owned for 4 years have a new truck so not getting used 100bucks for mount kit on trade me then just labour to get them put in cheap for ks rims price goes up if end up fixn love the car but time to go price is firm or swaps or swaps cash my way deals diff is a turbo item cost a grand nearly in its own 190 befor gst for axel new sway arms new center berring new coils and heaps of other bushes good car apart for mounts worn.no time wasters cheers

                                                        %d comments
                                                        • .

                                                        1996 f150 and 1993 f150 4.9l 5 speeds

                                                        I have for sale a 1996 f150 (which is the red one) it is a daily driver and runs and looks pretty mint for what it is and comes with inspection. I also have a 1993 f150 (the blue one) which as of right now is torn apart because it's my project truck but not hard to put back together. The red 96 has showing on the odometer 255xxx km. The blue 93 has 234xxx miles on it (the dash is in miles it was swapped from a parts truck) both Guage clusters have been changed so true milage is unknown. If you are interested please call or text 587-532-9502 a text is probably better. Or pm me and comment that you did so. Make reasonable offers and I probably won't refuse but I am in no rush to sell will also look at trades.

                                                        %d comments

                                                          If you see a post that you want to save simply go to the small arrow and hit...

                                                          If you see a post that you want to save, simply go to the small arrow and hit "Save Post" (Add this to your Saved Items). To retrieve the posts you have saved, go to the main Facebook page and go to Saved.

                                                          To search for a certain post, go to the magnifind glass icon above the groups page and type in the keywords in the search box. Make sure the "In Group" is highlighted blue.

                                                          To look up the files that our members added, go to the Info "i" icon, scroll down to find "Files". To add pdf files of write ups, photos etc, tap the "+" sign.

                                                          I hope this helps.

                                                          %d comments

                                                            Need a hand guys

                                                            Need a hand guys.

                                                            Have had my EX for about 2 months, love it so far, it's a 2000 6.8L V10 4x4.

                                                            My issue is that it's pouring rain and my wipers have quit working on me, front and rear, and it appears be the fluid pumps have stopped as well. Had to drive home with no wipers, wasn't fun.

                                                            Now my question is are all of these on the same fuse? I can't find my owners manual and looking through the 2 fuse boxes I can't find a blown fuse.

                                                            My suspicion would also be a wire issue inside the lever, but most times a short in the wire would cause an intermittent issue (usually).

                                                            Signals work fine and high beams as well.

                                                            Any help would be much appreciated. And possibly a pic of which fuse specifically handles those, or relays? Thanks in advance.

                                                            %d comments

                                                              Bae just got steemed. Getting ready for surgery so this is what I m getting

                                                              Bae just got steemed. Getting ready for surgery, so this is what I'm getting. All these products are frome bulletproof diesel since they're down the street. Bpd oil air cooler, bpd egr cooler, profesional upgrade packet with plugs and filters and what not. One thing I can't decide on is do i go stock turbo or what should I look in to. I'll pull something here and there nothing that heavy or extreme. Truck is studded just can't decide on the snail size. I do have a heavy foot and love speed thow. Any suggestions. I guess I should mention it's an 03 6.0

                                                              %d comments

                                                                JL Zaring shared a link to the group: Ford Expedition Club.

                                                                New 1LiveLive video showing Ford Expedition's 4x4 Control Trac ability to software lock front and rear shafts to mimic full time lockers through its center diff lock software! Once engaged in either 4hi (traction control button off) or 4lo it stays locked until shifting out of 4hi or 4lo. Enjoy 2007 Ford Expedition in Last Chance Canyon with driving up the steeper north side Hill Climb :-)

                                                                You can access through http://www.1lifelive.com or the YouTube link below...,

                                                                Please LIKE and Please SUBSCRIBE ;-)

                                                                https://www.youtube.com/watch?v=dCdYeVzJGdU

                                                                %d comments

                                                                  My friend Lori Broussard need help with her 1999 ford expedition xlt 4x4 5

                                                                  My friend Lori Broussard need help with her 1999 ford expedition xlt 4x4 5.4L v8 202k miles on it. It wont start and need new battery. I need a help with what kind best battery for this car. I dont know anything about the battery fit in the expedition so dont want to mess it up. If putting the new battery in and if it wont start then it will be something else electronic... maybe i just leave it unplug for 10 mins or more to let it reseting itself system to get it start again

                                                                  Any one know what kind battery for this truck. Be very appreciative of your help!!

                                                                  Thank you

                                                                  %d comments

                                                                    Ford Fiesta MK6 1.25 Moondust Silver

                                                                    Ford Fiesta MK6 1.25 Moondust Silver

                                                                    99,000 miles

                                                                    Full service history (under my ownership)

                                                                    MOT January 2018

                                                                    Great car, owned for 2 years but selling due to have recently purchase a new car.

                                                                    GTR Bodykit includes:

                                                                    - GTR rear spoiler

                                                                    - GTR side-skirts

                                                                    - GTR front lip spoiler

                                                                    - GTR rear bumper with indents

                                                                    - Momo GTR Alloy wheels, Pearl black

                                                                    Full Power-flow Cat-back exhaust system with twin tips, with lifetime warranty

                                                                    Purple LED footwell lights

                                                                    Black Bonnet vents

                                                                    Halo-angel-eye xenon front lights with ice blue dipped beam

                                                                    Bee sting carbon fiber aerial

                                                                    Colour coded purple front callipers and rear drums

                                                                    De-wiped rear windscreen

                                                                    Team-HEKO window deflectors

                                                                    Electric Orange engine bay

                                                                    %d comments

                                                                      Lidus Lee Blaeser shared Ford Cortina Mark 3-4-5 Sales & Spares, East Rand Area.'s post to the group: Ford Escort RWD & RS Owners Club of South Africa (FERROCSA).

                                                                      1990 Ford Sierra XR6 Stripping for spares:

                                                                      Very nice empty bodyshell with papers on the road R2500.

                                                                      Left front door mirror R350.

                                                                      Right front door mirror R350.

                                                                      Complete Powersteering front suspension with steering rack R1950.

                                                                      Left front door shell R500.

                                                                      Right front door shell R500.

                                                                      Left rear door shell R500.

                                                                      Right rear door shell R500.

                                                                      Window regulators R350 each.

                                                                      Door glasses R350 each.

                                                                      Quarter windows R250 each.

                                                                      Rear Bootlid with glass R1250.

                                                                      Brake booster with master cylinder Complete R950.

                                                                      Instruments cluster R500.

                                                                      Very nice steering wheel R650.

                                                                      Headlamps R350 each.

                                                                      Taillights R350 each.

                                                                      Rear diff complete was locked R1950.

                                                                      Bonnet needs lots of work R250.

                                                                      Whatsapp-sms or phone Lidus Blaeser on 0729676764 in Bonaero Park in kempton park.

                                                                      %d comments

                                                                        1997 f150 extended cab 4x4

                                                                        I'm about to put a new bed, and new front fenders on it so body will be nearly flawless. Alright well mines a 97 ext cab 4x4. It had 216k on the body but a new front end I spend 1k on a month ago it's all moog, it has a new brake master cylinder, new starter, new brake lines, new rear bulbs, new bumper, new rear ujoint, new touch screen double din radio, 2 12" kicker comp subs in new separate boxes, great interior barely anything wrong really just a couple cigarette burns, the dash is perfect no cracks, there's a new belt and spindle, I think 5 new plugs and coils, paint job is great there's a couple scratches tho, there's a big dent in the back passenger side of the bed from the last owner jack knifing it

                                                                        %d comments
                                                                        • Those look great

                                                                        • Haha great minds think alike

                                                                        • Yeah man it's 10x easier to find dodge wheels than 5x135s lol

                                                                        Photos from Donovan Cosworth's post

                                                                        RS 2000 PROJECT FOR SALE

                                                                        Hi guys .

                                                                        PLEASE READ CAREFULLY! Basically what I have is almost everything to build an RS .

                                                                        *Licence paperwork on my name

                                                                        *engine with matching numbers to paperwork (fully rebuilt bottom end)

                                                                        *RS manifold

                                                                        *gearbox

                                                                        *3.7crown wheel and pinion

                                                                        *nosecone

                                                                        *bonnet

                                                                        *fenders

                                                                        *bezels

                                                                        *bumper ends

                                                                        *seats

                                                                        *doorpads

                                                                        *cluster

                                                                        *mini cubby/clock surround

                                                                        To go with the package is original unpainted 1.3 body .The car was purchased many years ago however does not have papers thus I was going to basically re-shell all the spares into this car .The car does have original tags in place .It also has a 831c 1.6 motor . As a complete package I am looking for R75000 neg. The package can also be split into RS spares at R40000 or the 1.3 body at R35000 ...To those that can't afford an original RS or the purist who would like to build something retro/modified without molesting an original car this is your opportunity to do so...New body shells have been currently shipped to the Uk where the same re shell process will take place as it has been done many years prior due to the rarity of clean Rs models .To those who have nothing good say...Kindly refrain from saying anything at all . To keen buyers kindly contact me on 0832402727...I will be able to assist with more details and pics .located in Durban

                                                                        %d comments

                                                                          G day all I ve just bought this 2001 courier 4x4 TD 160 000km and looking at...

                                                                          G'day all. I've just bought this 2001 courier 4x4 TD 160,000km and looking at driving 3hrs to the in-laws joint (who have a mechanics shop) to look over it in a hoist. I'm a little paranoid as this car is going to be driven by me for a week before the journey. I am going to do the engine oil before the trip as it's black and wondering what else I should look at doing myself before the trip. I'm pretty handy with cars but never owned a turbo diesel 4x4 so any suggestions would be well accepted.

                                                                          Cheers in advance.

                                                                          %d comments
                                                                          • Moat people i spoke to recommended putting an extra 500 ml to a liter in the gear box to help get the oil up to the 5thgear bearing..

                                                                          • Just fill till it runs out I thought?

                                                                          • From what they was saying is to run the wheels up on ramps same side filler bung is on to allow the extra to go in .. think its 2.5 liters in the gearbox normall so between 3 and 3.5 is what ive been recomended

                                                                          Im just gonna ask here in cade this us an issue people have had 02 courier 4x4

                                                                          Im just gonna ask here in cade this us an issue people have had, 02 courier 4x4

                                                                          symptoms

                                                                          Harsh vibrstion when driving throughout entire car

                                                                          Upon rolling to or using the brake to stop either fromt or rear wheels lock (didnt want to drive it anymore to get a definite of front or rear)

                                                                          Rear diff is leaking a bit from pinion and what seems like both sides where wheels bolt on, but no grinding or noises coming from diff that i could tell

                                                                          Im aware of control arm bushes being non existent so im putting some of the vibration down to that but it cant all be that and unsure of issue with wheel locking up

                                                                          %d comments
                                                                          • Will give that a shot, Hopefully nothing msjor, cheers mate

                                                                          • You are cursed with cars bro

                                                                          • I know right haha but hell i know the motor is healthy as hell, just need to figure this issue out then its on the road hopefully for a long time Seamus Brooke

                                                                          I m having a weird problem that I m wondering if anyone else has had

                                                                          I'm having a weird problem that I'm wondering if anyone else has had.

                                                                          On an 04, none of the windows were rolling up or down from the driver's side door, and some weren't even working from their own doors. So I ordered a new driver's side window cluster and installed it, but it was super cheap and flimsy, and it wouldn't roll the driver's side rear window up (rolled it down fine).

                                                                          So I took the OEM window control cluster out & took it apart, cleaned it with rubbing alcohol (it was filthy), and put it back. Worked perfectly, except the driver's side rear window still wouldn't roll up. It rolls down, just like before. It rolls up and down from it's own door, too, so I know it's not the motor.

                                                                          When I try to roll that window up from the driver's side, my lights go dim and the engine sounds like it's under stress. I also have been told I have an electrical issue with the car after I got my oil change done at WalMart (I know, I know...), but a guy at AutoZone said I had that issue too, but the battery is solid.

                                                                          Anybody have any ideas? I'm stumped.

                                                                          %d comments
                                                                          • I had the guys at AutoZone test the battery by itself and it was within good range. I'm not sure what the exact reading was, though.

                                                                          • I know AutoZone aren't exactly ASE certified, lol, but I don't see how difficult it would be to read a battery voltage.

                                                                          • The wires run out to different places from the door. I had this issue in my explorer 4 wires broken in the boot. I used crimp connectors because i couldnt figure out how to get enough wire loose to het om amd solder it been 2 years now and still working.

                                                                          looking to trade 02 sonic blue plus cash for something nice

                                                                          2002 150k miles clean title sonic blue gt 5 speed

                                                                          2003 70k mile motor bbk throttle body bbk cai bama x3 tuned

                                                                          tr3650 unsure on milage looks kinda new spec clutch ford throw out bearing new clutch fork new ford pivot stud new pilot bearing new steeda clutch cable kit with quadrent etc new rear main seal royal purple transmission fluid still in break in phase have receipts for 900$ worth of clutch work short throw shifter

                                                                          Eibach sport line springs magna flow exhaust with high flow cats 4.10 gear

                                                                          series 3 sve's 19x10 275-35-19 front 285-35-19 rear all tires have 75%+ tread

                                                                          the bad: hood scoop is faded can be buffed back the hood has rock chips in it not too bad and the driver side fender needs to be repainted ugly red interior parts need to be repainted the passenger seat has a rip in it

                                                                          the car has no running issues whats so ever ac and heat work

                                                                          I have a full polyurethane saleen body kit never mounted I can add in a nice trade

                                                                          includes front and rear bumper side skirts and saleen wing with the 3rd break light

                                                                          4800$ price includes the saleen kit

                                                                          %d comments
                                                                          • bump

                                                                          • ;)

                                                                          • bump

                                                                          So I have a 2004 6 8 4x4 that we just purchased 6 months ago when my wife got...

                                                                          So I have a 2004 6.8 4x4 that we just purchased 6 months ago when my wife got stationed in Puerto Rico.. The roads here are terrible with massive potholes. I have chased down most of the rattles and squeaks but there is one in the drivers kick panel floorboard area that I just can't locate and it drives me NUTS!!! Has anyone else experienced this drivers kick panel floorboard rattle? I have had it on a lift on base 3 times and nothing under the truck is loose that I can see. But I can clearly feel in my left foot when I am driving a vibration in the floor that coincides with the rattle noise. Any help is greatly appreciated!

                                                                          %d comments

                                                                            Alright So I need a little help Rained pretty heavily past night and drove...

                                                                            Alright... So I need a little help. Rained pretty heavily past night and drove through a deep puddle, battery light comes on. Checked any all fuses I could think of the next morning. I had pack rats chew through two lines from the alternator previously and did a quick repair. The light is still on despite reconnecting the battery and repairing the lines...

                                                                            My question is, the alternator bad or what? I cannot think of what to do next and I'm not a mechanic but I am mechanically inclined. I've taken the alternator out before and really I'm looking at any other options before I have to do that.

                                                                            %d comments
                                                                            • Start the engine and disconnect the battery. If you still have power them your alternator is good.

                                                                            • I did that... :( I guess I have to tear the thing out again. Thanks for the tip, I appreciate it.

                                                                            LONG story short I bought all these parts to buils a short block and ended up...

                                                                            LONG story short, I bought all these parts to buils a short block and ended up buying a long block. My loss, your gain.

                                                                            These are new in box. Now opened to look at parts and put back in box. NEVER INSTALLED.

                                                                            Manley platinum pistons 3.572 paid $750 from summit racing, sell for $625.00.

                                                                            Manley rings for above pistons, paid $232.00 at summit racing, sell for $200.00

                                                                            Manley H beam rods. Rod-14040 w/arp 2000. These are upgraded to arp 2000 bolts, not standard arp bolts on standard rods. Special order thought summit racing. Paid $750, sell for $650.00

                                                                            Manley valves for heads. Part 11636-8. (Stock size) I didn't want to take chance using used valves. Paid $160.00 though summit, sell for $130.00 (set of 8)

                                                                            Manley valves for heads. Part 11637-8. (Stock sized) paid $160.00, sell for $130.00 (set of 8)

                                                                            Comp cams Xe270ah summit price $637.00, sell for $550.00

                                                                            All parts brand new in box, never installed

                                                                            %d comments
                                                                            • Josh Mccloud

                                                                            • That's what sparked by interest in putting my heads together Matias Perez Amestoy. I've talked with Manley, and I planned on running the bead loc valves, which are a little different from marks triple grooves. I'm not sure that there is anything better about them though

                                                                            Hey guys anyone familiar with these 2 very specific issues my cousin just...

                                                                            Hey guys anyone familiar with these 2 very specific issues, my cousin just picked up a little 1998 expedition 4.6 xlt model. It has 165k miles things a beast for its age and mileage. Recently swapped the windshield due to leak and destroying Gem module.

                                                                            1. When making a left hand turn or hitting the brake to a near dead stop and hitting the gas the vehicle bogs down almost to the point of shutting off as if it were running out of gas.... My first guess would be fuel filter

                                                                            2. His ac is not blowing cold and the zoning seems to be having issues. Can not control the front and or rear. Compressor seems to be turning when ac is put on and we recently attempted to put freon. Didn't fix the issue... first guess is the heater core?

                                                                            %d comments
                                                                            • I just verified if it's blend door it's electric actuator. The only vacume actuators are to open floor vents and defrost vent.

                                                                            • Thanks huge help!

                                                                            F350

                                                                            I have a 1995 F350 for sale I'm asking 2000 or best offer. It has the 5.8 L with the EO4D trans. The truck has 320,000 miles on it. The miles will go up because it is my daily driver. Has front two tires at 50% one back tires brand-new the other one is a 35%. Interior is like a five out of 10. The back right door does not open I guess the latch is broke off inside. Has tinted windows all the way around. Has gooseneck ball in bed. Has a ranch and front bumper just a bolt on the full replacement. Like I said I'm asking 2000 or best offer if y'all have any other questions that I didn't cover

                                                                            %d comments

                                                                              Okay sat in my Ex for a few minutes to answer emails after I shut it off after...

                                                                              Okay, sat in my Ex for a few minutes to answer emails after I shut it off after driving about 20 minutes this morning. Heard a faint hissing/sizzling noise? (which I thought might have been vacuum/defrost related at first) and then noticed the battery and ABS/CEL were very dimly lit. After a couple of minutes, a click and a single door chime. And then the theft light started blinking fast, before stopping all of this after a few seconds.

                                                                              Does this sounds like a windshield leak/fuse box issue like I've seen people post about? It did rain last night...

                                                                              %d comments
                                                                              • When my box went I had started the truck and ba Ked it out of the garage. My head lights would not turn off. After a short time I started smelling burnt wiring. I tools it to the Ford dealer and they put 2 guys on it right away running down all the wiring, they finally pulled the plug to the fuse box which of course stopped the issue. When they put the new box in they said the old box had water in it. Do not know how it got there, but the truck is a garage queen. It has been in rain since. So far so good

                                                                              • My 01 7.3 done that. Was alternator. If not that ur batteries

                                                                              • Good to know. Batteries weren't very old, previous owner replaced both a few months before I bought it, but easy place to start.

                                                                              92 jeep wrangler yj 2.5 5 speed 4x4

                                                                              Any mustangs for trade?? - delete if not allowed

                                                                              1992 Jeep Wrangler YJ

                                                                              2.5 4 cyl 5 speed , 4x4 - works great

                                                                              Brand new transmission and transfer case (see pics)

                                                                              3" diamond lift sitting on Mickey Thompson 33x12.5s

                                                                              Leather seats

                                                                              COMES WITH NEW hard top , soft top AND bikini top also have a push guard for it

                                                                              Runs and drives good , does need some TLC I haven't had time to do yet. That would be - front sway bar end links , shocks and driver side inside door handle)

                                                                              Tons of new parts done in January have receipts to go with all new parts

                                                                              New radiator & hoses (including heater hoses)

                                                                              New clutch, resurfaced flywheel

                                                                              New fuel pump

                                                                              New exhaust manifold gasket

                                                                              New battery

                                                                              And much more forgetting a few things

                                                                              %d comments

                                                                                Photos from Derrick Waltho's post

                                                                                Decided that the weeping seals on the rear dampers was too much trouble to resolve permanently so i've fabricated some hangers to fit classic Mini dampers. They utilise the original damper bolt holes, I've used some bottom spring plates that I had in the garage from another project but the original ones could easily be modified to do the same. I've used some cheap OEM type ones first but intend to change them for some ride height, rebound and damping adjustable ones later. They could also help anyone out who's experiencing clearence issues when fitting larger wheel/tyre combo's.

                                                                                %d comments
                                                                                • If cut correctly and re shaped on the end it shouldn't be a problem I would think.

                                                                                • The easiest way to lower the rear with standard dampers is to put a lowering block between the top of the spings and the bottom of the axle, you can choose the block height you want, the higher the block the lower the car, if that's what you want to acheive?

                                                                                • Derrick Waltho It is indeed, the front is just as important.

                                                                                ISO

                                                                                Looking for this car it was stolen from the Lowe's parking lot in Salisbury nc last Thursday pm me with any information on the car I will offer a cash award no questions asked to the person who tells me where the car is and I recover it thanks for your help fellow stang drivers

                                                                                ISO

                                                                                $123 - Gastonia, NC

                                                                                Looking for this car it was stolen from the Lowe's parking lot in Salisbury nc last Thursday pm me with any information on the car I will offer a cash award no questions asked to the person who tells me where the car is and I recover it thanks for your help fellow stang drivers

                                                                                %d comments
                                                                                • Any idea if it used to have a 6" cowl hood on it or LX tail lights? I sold a 93 GT to a man in that area about 5 or 6 years ago. If it's the same car I'd know it if I seen it. Either way I'll keep my eyes peeled, but those things part out fast.

                                                                                • Hope you find it.I would be really upset to.Can you fix it where I can share you post.

                                                                                • Idk how

                                                                                Samantha Hart updated the description of the group Ford Club QLD ( Official State Page ).

                                                                                Ford Club QLD ( Official State Page ) is for organizing local cruises, events and meet-ups for QLD only. This Club welcomes all Ford makes and models.

                                                                                Admins:

                                                                                Samantha Hart (Northside )

                                                                                Jay Hart (Northside)

                                                                                Joel McKeon (Southside)

                                                                                Anthony Handisides (Southside)

                                                                                Max Clarke (Northside)

                                                                                Matthew Goodall (Northside)

                                                                                Luke Matthew ( Sunshine Coast)

                                                                                Michael Standen (Southside)

                                                                                Moderators:

                                                                                Zachary Baldwin

                                                                                Club sponsors are as follows

                                                                                Tiny Daddy's (Cole Gross)

                                                                                Budget Kustom Stickers (Chris Fox)

                                                                                Style Side Tyres Gold Coast (Ben Thomas )

                                                                                Tekno Performance (Greg Markham)

                                                                                Torque Time (Palol Boni)

                                                                                Perfect Shine ( Luke Matthew)

                                                                                Procheck (Tim Ross)

                                                                                JC Custom Tyre Decals (Jase Collins)

                                                                                A huge thank you to all our sponsors.

                                                                                %d comments

                                                                                  VY SS Ute

                                                                                  8.5k or make cash offer need gone! Selling due to personal reasons

                                                                                  2003 VY SS UTE

                                                                                  6 speed manual

                                                                                  233 233 camtech cam "very lumpy and loud"

                                                                                  Double row Springs

                                                                                  OTR with mafless tune and been tuned since cam has been installed

                                                                                  Just under 400rwhp dyno sheets to prove.

                                                                                  New fuel pump and high psi lines from fuel pump to steel lines

                                                                                  Try Y extractors

                                                                                  2 1/2 " exhaust into quad pipes

                                                                                  200xxx in the clock

                                                                                  New stuff

                                                                                  Leads

                                                                                  Plugs

                                                                                  Pulleys all round

                                                                                  Alternator

                                                                                  Starter motor

                                                                                  Water pump

                                                                                  Harmonic balancer

                                                                                  Air con has just been regassed and works excellent

                                                                                  New good lining

                                                                                  New donuts in tail shaft

                                                                                  20" advanti rims with 9.5" rears

                                                                                  Good stuff

                                                                                  Big audio sound system with blue tooth wireless calling

                                                                                  Torneau cover

                                                                                  Bad stuff

                                                                                  Paint is good but has a scratch on drivers guard not major

                                                                                  Drivers seat has 3 rips but has seat cover throw over on it

                                                                                  Had to replace dash as the fuel gauge was playing up so now has a Calais dash cluster which is better gives more options.

                                                                                  Still have old one to prove kms

                                                                                  Probably more I have missed fresh 6 months rego and Rwc will be supplied Read less

                                                                                  %d comments
                                                                                  • Daniel Thomas

                                                                                  Well guys I messed up Hatched the 4v 5 4L InTech in my 01 Navigator towing my...

                                                                                  Well, guys, I messed up. Hatched the 4v 5.4L InTech in my 01 Navigator towing my Jeep on a big trailer (probably 10k lbs or a little more). I guess the rear main went, and as soon as the oil was low enough in the sump for pressure to drop and show on the gauge, rod bearings and possibly mains were already mainly gone. Dropped the load, tried starting it, and the way it cranked it acted like it was hydrolocked. So I'm pretty sure I spun a few bearings at least, if not wiped cam lobes too. Anyone have suggestions on where to go from here? Build it, rebuild it, replace or scrap it? It's an 01 with 130k on the clock and a very strong trans, so the replace sounds best, but that's gonna be a pocket full of cash I don't have assuming I can even find that rare InTech 4v. Also, anyone know whether pulling it is a non-body off option, or if I'm in for a world of fun if I do decide to pull and rebuild/replace it? Because if it's stupid hard to pull that engine, I'm gonna make sure I do it once and just build the current block, so I don't ever have to worry about pulling it again.

                                                                                  %d comments
                                                                                  • Patrick Macaluso Uh oh. Haha. Memorable impressions, eh? xD

                                                                                  • http://www.car-part.com may help in your search

                                                                                  • Well... I'm a very meticulous person. I used the manual, wrote down step by step notes with bolt sizes and torque setting, put labels on every hose and wire, took pictures as I went.... and I had to improvise a little because you're supposed to unbolt the torque converter from the driveplate one but at a time by spinning the engine, but my engine was seized so I couldn't do it that way. So it was a lot tougher pulling it out than it should have been. The new one went in much smoother. Spend 3 weeks on something in your driveway and it sticks with you.

                                                                                  SCT XCalibrator OBD-II handheld flash tuner, stock headlights and stock spoiler

                                                                                  READ THE PART ABOUT THE HANDHELD FLASH TUNER!!! The only problem with the tuner is that I never returned my 2002 mustang GT back to stock before I got rid of it.. so the tuner is still married to the old vehicle which I don't have access to anymore. The only way to reset it in order to use it on another vehicle is to send it to SCT and have them reset it and I'm pretty sure they charge you to do so. With that being said, I'll sell the tuner kinda cheap just because it's married to a 2002 mustang GT already. Stock spoiler and stock headlights from a 2002 mustang GT. The headlights have minimal oxidation. Could be a lot clearer with a simple headlight cleaning kit. The spoiler just needs a paint touch up. $215 OBO for everything, or $120 for the tuner, $35 for the headlights, and $60 for the spoiler. Everything is priced to sell.. just need this stuff gone!

                                                                                  %d comments
                                                                                  • What year do these fit, are the smoked, what year does the spoiler fit

                                                                                  • The spoiler came off of a 2002. The headlights just sold today

                                                                                  Photos from Jalen Gilbert Wright's post

                                                                                  Hi there, remember i was talking about the upgrading the roof rack for first generation Ford Expedition, like I did on my old 02" tan ford expedition xlt 4.6L 4x4 with lots of chromey exterior, as i got the chrome roof rack from The first generation Lincoln navigatior too,

                                                                                  I also happened to same thing on my old other 98" Silver Jeep Grand Cherokee Limited ZJ 5.2L that i did upgrade the roof rack on my silver 98" jeep grand cherokee limited 5.2L 4x4 that i removed the bored stock roof rail luggage and got the nice 5.9 verison upgrade roof rack for only 5.9L grand cherokee, so i remove the roof rack off from the 5.9 from the Auto Wreak Collision shop in next door to pick n pull scarpyard, in sparks NV. Cost me around 65 buck for "roof rack luggage" but on ford expedition with chrome roof rack came from the pick n pull and got it for less 40 buck.

                                                                                  Now I have a 06 Jeep Commander base 4.7L 4x4 that have one side of broken peice of roof rack rail and two missing roof rack bar, so I went to pick n pull but they didnt have any Commander in their lots. So i went to next door to Auto Wreak shop that has lots newer model american cars, chrysler, dodge, jeeps ford, and gmc and chevy and pontiac, and hummer, and etc... non american will go to Pick n pull. I just found a REALLY RARELY nice 08" VW Phaeton with W12 engine in pick n pull lot in Reno NV? I was alike and my roommate was stocked and want this car badly because this car is very expensive! AND NO ONE HAS PART OUT yet, because no one has that kind car!!! damage and fire damage in rear. We looked up for other phaeton W12 for sale cost over $20k. So this one got pretty nice one and got really bad fucked up. Someone destroy over $60k a german car badly? Geez! So anyway. I went to auto Wreak shop and found few commander up there. So i went up and saw other nice dark green Jeep commander limited 5.7L HEMI 4x4 with nice chrome roof rack luggage with the bar and the handler for rear top of taillight so bought the nice chrome Roof rack rail and bars and floors mats and it's third time i have done it each of different car!

                                                                                  JEEP GRAND CHEROKEE ZJ has 2 different roof rack look, Ford expedition has Lincoln navigatior roof rack, and now my Commander has 2 different roof rack opition with black cheap plastic roof rack or the real chrome roof rack from the Limited or Overland edition. Cant wait to install it up on my jeep and make my commander look more upgrade again! Than seeing other twin jeep again! Hahaha

                                                                                  I know im kind of weirdo of doing something new and upgrade my jeep and other car i had in past.

                                                                                  Please tell me if this is not okay for this post and want to detele this post. I will take it down. No offense.

                                                                                  %d comments

                                                                                    1992 hzj75 landcruiser

                                                                                    1992 Toyota land cruiser.

                                                                                    $6700 NEGOTIABLE

                                                                                    Rough round the edges but heap of spare parts and motors still got plenty of life. Looking to straight swap for Mazda/ford, 3 litre hilux or navara dual cab, will drive the ute to Perth if necessary. Has spare custom bonnet, fibre glass roof set up for spotlight, guard, dash, seat parts. 1 rear hub rebuild kit etc. Have owned since august 2015 and has been serviced every 5000ks, new alternator and viscous hub as well as front end drive line over haul. Current bonnet has rust and drivers door needs repair but does everything you need it to. The ute has also been converted to single seats with a weaco console in between and a rear sliding window in case ya need to grab more drinks off the back.

                                                                                    also had BRAND NEW vinyl floor going in on the weekend.

                                                                                    %d comments
                                                                                    • David Jacobson sounds like what you want

                                                                                    Has anybody had any fuel gauge problems and getting an excessively rich code on...

                                                                                    Has anybody had any fuel gauge problems and getting an excessively rich code on the gen 1 6.2L? I was wandering if it's the fuse 27 cause this problem to! The truck will have 3/4 of a tank and it will go to empty fuel light comes on then it will get super rich and of coarse check engine light come on with the rich code! Seems to be doing it more and more often it's getting old for damn sure! It always seems to do it right after it's been started or coming to a stop or at slow speeds! I've reflashed it and will still do it over some time! Thanks in advance for the help!

                                                                                    %d comments
                                                                                    • Lol!!

                                                                                    • Jim Matus another thing i'm useful for creating that master piece for you to troll the shit out of people with

                                                                                    wia welder near barley used

                                                                                    $1000 ono barely used good welder only selling because upgrading

                                                                                    Stock photo as not near unit but looks and basically is brand new

                                                                                    Location windellama but can bring into Goulburn or marulan if need may post at buyers expense thanks

                                                                                    wia welder near barley used

                                                                                    $1,000 - Sydney central business district

                                                                                    $1000 ono barely used good welder only selling because upgrading

                                                                                    Stock photo as not near unit but looks and basically is brand new

                                                                                    Location windellama but can bring into Goulburn or marulan if need may post at buyers expense thanks

                                                                                    %d comments

                                                                                      Mark Lloyd Riddell shared a link to the group: Hot RWD fords 1960/80.

                                                                                      %d comments

                                                                                        Can anyone help us pls We re crossing the nullabor towing caravan and added...

                                                                                        Can anyone help us pls. We're crossing the nullabor (towing caravan) and added 10l ad blue 1200km ago. We've just had a warning that engine won't start in 800km "ad blue system malfunction no system start in 800km". We are at least 1000k from anywhere significant!!!! Does this mean we can only drive another 800km?? Hand book doesn't have any info that i can see.

                                                                                        It's not saying adblue low, it's saying system malfunction (service required), from what i can see filling it won't help it'll need resetting/service

                                                                                        %d comments
                                                                                        • My thoughts exactly. we have top roadside assistance but with racv that only gives you 100km towing. When we were looking at 1200km tow yesterday I thought it might have been the end of our trip! Every minute we are edging closer to civilization

                                                                                        • You can do it!

                                                                                        • Hope you're still moving and getting closer....

                                                                                        Hey I ve had this misfire problem for the last week and a half to two weeks it...

                                                                                        Hey, I've had this misfire problem for the last week and a half to two weeks it comes and goes but every time it misses o2 bank 1 is at 0 and bank 2 is doing its thing. Also notices it it does worse when it's wet or rainy out. Figured I'd go ahead and replace all 4 sensors, but was also wondering what else I should look for? The truck has longtubes, hi flo cats, with the extender harness for o2 and borla exhaust, stock maf with Jdm intake and ngk tr6 plugs I put in about a month ago. Forums weren't helping at all. Thanks!

                                                                                        %d comments
                                                                                        • Will definitely check that out thanks for the advice

                                                                                        • Checked the cowl seal and it was brittle and broke so I did a water test and it was in fact leaking right on the coil packs. Ford discontinued them so I used rtv and fix that and also changed upstream and downstream o2 sensor and seems to be running better now. Time to drive it and make sure.

                                                                                        • Curious to what the cowl seal is ? Spark plug boot ? Never heard of it .

                                                                                        2000 Civic Hatch Clean. Trade For MUSTANG but Entertain Offers

                                                                                        2000 EK hatch single cam. 192k actual miles paint 2 years old had few flaws due to fenders being rolled. Fully adjustable suspension BWR rear subframe and LCAs. Front camber kit. Sitting on BRAND NEW JNC 049 16x9 with BRAND NEW 195/45/16 tires. Full exhaust double din radio prothane shifter bushings. Led SI gauges pillar pod gauges, true carbon fiber weighted shift knob with adjustable shifter. Fog lights and rear bumper n with fog light that works like it should with park lights. CTR wing, tinted windows. Stage 1 clutch in car now have a extra 6 puck I will let go as well and NO the clutch is not coming out the car for the reason I'm throwing the extra clutch in.. has rear trailing arm adjustment arms. Asking 4200 firm if YOU DONT LIKE THE POST OR HE PRICE I DONT CARE JUST TAKE YOUR FINGER AND SLIDE TO THE NEXT POST! Your opinion is invalid so keep it to your self! With that being said I Will take trades but no junk or halfway put together cars. I have a lot of time and money in this car it will sit in my yard as a yard magnet before I let it go cheap. Prolly missing a lot of details car is a real head turner.. MUSTANGS, TRUCKS, ETC. NO SALVAGE, REBUILT TITLES!!

                                                                                        %d comments
                                                                                        • Still interested

                                                                                        • That notch is worth more than $4200. Rollers go for about 2k to 5k.

                                                                                        • I'm selling my 92 gt 90k original miles for 5k

                                                                                        2004 Supercharged Mustang Gt

                                                                                        I have for sale my beautiful 2004 mustang gt which has a clean and clear title it has a rare and unique svo supercharger that was port matched for the pi heads on the car. The car has 114,000 miles and The car sits in the garage so miles won't go up much. The car has been supercharged for about 4,000 miles. The supercharger was rebuilt by jb performance before it was put on. The car is very quick and will surprise you it dynoed at pro dyno and had 321 whp and 351 torque on 8 pounds and a very conservative tune. The exterior is probably a 8 out of 10 and interior probably a 8.5. The only problems with the car is the abs light is on and exhaust leak by the h-pipe and the driver seat has a rip in it. You can call or text me anytime for more info and pictures. Here is some of the parts that I can think of off the top of my head. I do have receipts for everything bought for the car.

                                                                                        Parts list:

                                                                                        Svo supercharger (m112)

                                                                                        Sct big air maf and housing

                                                                                        Walboro 255 fuel pump

                                                                                        30 pound injectors

                                                                                        K&N air filter

                                                                                        Injen hydrophobic air filter cover

                                                                                        BBK cold air intake

                                                                                        Steeda short shifter

                                                                                        Sct x4 tuner

                                                                                        Exedy stage 1 clutch (2000 miles on it)

                                                                                        Ford racing pilot and throw out bearing

                                                                                        BBK adjustable clutch kit

                                                                                        MMD 18x10 inch wheels

                                                                                        Sumitomo sport tires 265 in the front 285 in the rear (1,000 miles on the tires)

                                                                                        Raxiom sequence tail light harness

                                                                                        Ceramic Break pads and new rotors (July 2016)

                                                                                        All new bushings up front

                                                                                        New ball joints in box

                                                                                        NGK tr6 spark plugs.

                                                                                        Off-road h-pipe

                                                                                        Dyno max mufflers

                                                                                        Transmission and radiator flush done at the time of the clutch install

                                                                                        Box of random stock parts

                                                                                        Oil changed in supercharger and engine (3/17/17)

                                                                                        Custom dyno tune by dan at pro dyno

                                                                                        %d comments
                                                                                        • I don't c a supercharger

                                                                                        • Nvm lol

                                                                                        • Yeah it's hidden

                                                                                        Photos from Heath Braunstein's post

                                                                                        Got disgusted with the cheapo LED strips I installed a few months ago - three out of the six malfunctioned and the pvc tubing mount looked a bit strange. Decided to upgrade and switch from purple to blue.

                                                                                        Found these on Amazon - 3w LED light pods - a set of six. Made harnesses and tied to existing running board (removed) wiring. Put one on the frame pointed at the ground by each door and added one for the front of the truck and one under the hitch. Used super heavy duty 2 foot zip ties to fasten them to the frame.

                                                                                        Super bright and heavy duty - will get some more pics tonight of them actually lit... Lol

                                                                                        %d comments
                                                                                        • Can't wait for nightfall!

                                                                                        • I installed those

                                                                                        • Wow - great deal and super bright too. Did these come in colors?

                                                                                        I am in the process of doing a 4wd swap as well as puting a 6 inch suspension...

                                                                                        I am in the process of doing a 4wd swap as well as puting a 6 inch suspension lift my 96 f150 so I have the old parts from the 2wd setup that I am trying to sell.

                                                                                        Parts I have are:

                                                                                        Both I beams

                                                                                        Both spindles

                                                                                        Front rotors are ify

                                                                                        both calipers

                                                                                        Both caliper mounts

                                                                                        Both radius arm mounts

                                                                                        Brand new single shock spring bucket

                                                                                        Passengers side cradle mount for I beam

                                                                                        Both rear 1/2 ton leaf springs

                                                                                        2 leaf spring mounts

                                                                                        2 leaf spring shackle mounts.

                                                                                        --- no reasonable offer will be denied---

                                                                                        But the brand new single shock spring bucket I have to get at least 65 for they are 150 new.

                                                                                        I'm located in tallmadge ohio.

                                                                                        %d comments
                                                                                        • Are you doing a solid front axle?

                                                                                        Photos from Timothy G. Sexton's post

                                                                                        It's a long shot but it's worth a try.

                                                                                        I want to TRADE my Burban for a excursion.

                                                                                        Needs to be 4x4 and it being lifted is a plus!

                                                                                        LOCATED IN NEW JERSEY!

                                                                                        I WILL TRAVEL TO PA BUT THAT'S IT.

                                                                                        Info On My Truck:

                                                                                        2003 Chevy Burban

                                                                                        LT 4x4 with a Vortec Engine

                                                                                        151,000 miles on body

                                                                                        89,000 miles on new motor

                                                                                        Automatic

                                                                                        New Tires

                                                                                        FlowMaster Exhaust

                                                                                        Interior is in perfect condition

                                                                                        Tons of aftermarket parts

                                                                                        Needs Nothing !!!

                                                                                        Runs and drives !

                                                                                        Pulls Strong !

                                                                                        Goes Fast !

                                                                                        A/C blows Cold, Heat blows Hot

                                                                                        Any other questions just ask, Thanks!

                                                                                        %d comments
                                                                                        • Chevy Dealership -A Junkyard in every town

                                                                                        • I think I'm the only person who loves both Suburbans and Excursions. Nice to see someone else lift one. GLWS

                                                                                        • Once saw an ad for a Suburban I would consider trading - was a Black 1998 2500 series with a 454, leather interior and loaded. Beautiful truck....

                                                                                        AC gurus I m stumped Been fighting a leak on my wife s 03 6 0 Finally...

                                                                                        AC gurus, I'm stumped. Been fighting a leak on my wife's 03 6.0. Finally determined it was the condenser leaking, so I ordered a new Motorcraft condenser and swapped it out. Pulled a vacuum on the system and got it to 29.5 inches of vacuum, left it pulling for over an hour. Shut everything and it held the vacuum for 1+ hours without any change.

                                                                                        The issue is on filling the system. Hook my R134 up to it, purge the air out of the charge line and then open the manifold up to the low side. Almost immediately it "fills up" and doesn't take any refrigerant, sitting at around 80psi (most likely can pressure). I let it sit there, but nothing seems to be flowing into the system. Started the truck and turned the AC on, no change. Jumped out the low pressure switch to get the compressor to pull it in and that barely did anything, although I didn't leave it for long as to not damage the compressor. Am I dealing with some kind of blockage? Any help would be appreciated!

                                                                                        %d comments
                                                                                        • No, as the condenser had a leak in it. I got the system charged up last night though (y)

                                                                                        • So system is charged up now?

                                                                                        • Yes sir, thankfully.

                                                                                        white BA FALCON

                                                                                        Hi guys, I'm a recently unemployed father of two and some scum bag has side swiped my only mode of transport and drove off. It's a white BA fairmont. I need a right hand front guard, side mirror and two right hand doors, for cheap or giveaway, can anyone help out?

                                                                                        Thanks in advance

                                                                                        Hi guys, I'm a recently unemployed father of two and some scum bag has side swiped my only mode of transport and drove off. It's a white BA fairmont. I need a right hand front guard, side mirror and two right hand doors, for cheap or giveaway, can anyone help out?

                                                                                        Thanks in advance

                                                                                        %d comments

                                                                                          Photos from P.w. Jordan Struebig's post

                                                                                          Fellas after 130k miles and 20+ excursions from South Dakota to Florida the heart of the beast is burning off oil. Oil changed week before snoball around mid January and I just check it and barely hit the tip of the dip stick.

                                                                                          1) there is no visible leaking so are 6.2 known for any particular point of burning off if no see 2

                                                                                          2) lets find a motor!! I am now in search more than ever for a wrecked 6.2 I can work on a bit ... roush would be excellent due to that I will be supercharging the new motor but in reality any would work.

                                                                                          Thanks in advance!!

                                                                                          %d comments
                                                                                          • Get new pcv valves and install a catch can.

                                                                                          • Is the truck white smoking from the exhaust? You could do a cylinder leak down test to see if the rings are bad and looking at the plugs would tell you if you're burning said missing oil. Check the radiator for oil or oily residue, that could be as easy as head gasket.

                                                                                          • What codes are you getting if any on the dyno?

                                                                                          Hello I am an original owner Ex 04 XLT 6 0 with 129k miles I m all bullet...

                                                                                          Hello, I am an original owner Ex 04 XLT 6.0 with 129k miles . I'm all bullet proofed up after blowing the engine twice while towing up a mountain. first go around was a bad rebuild as they didn't machine the heads. Sadly, I've neglected the undercarriage and it has a lot of rust. All the bushings are bad, etc. When, the undercarriage gets blasted is it ok to have it done with the body on or is a better to remove it and do a bunch of stuff. I've read about different springs, etc... I've no clue how much all this will cost and I am not able to do it myself. I am in Eastern Virginia. -Paul

                                                                                          %d comments
                                                                                          • FYI, SAME damn mountain both times!!!! Afton mountain in Central Virgina I-64. I was pulling my 10K camping trailer both times.

                                                                                          • I would remove the body, not that hard and makes it much much easier to do chassis work and a much better job.

                                                                                          • Body off there're alot of places on rear end of the frame that rust really bad and can only get to with body off (between frame rails above fuel tank)

                                                                                          2013 F150

                                                                                          118k miles, 3" level/lift, adjustable rear air shocks, trailer brake, tow mirrors, new 20" Helio Rims, camper shell with cargo rack, spray in bed liner, S&B cold air intake, SCT programmer with 5 star custom tune, flowmaster exhaust, this is in addition to the standard features for XLT 5.0. One owner truck non smoker in great condition always has steering wheel cover and WeatheTech floor mats.

                                                                                          2013 F150

                                                                                          $19,500 - Brookline, MO

                                                                                          118k miles, 3" level/lift, adjustable rear air shocks, trailer brake, tow mirrors, new 20" Helio Rims, camper shell with cargo rack, spray in bed liner, S&B cold air intake, SCT programmer with 5 star custom tune, flowmaster exhaust, this is in addition to the standard features for XLT 5.0. One owner truck non smoker in great condition always has steering wheel cover and WeatheTech floor mats.

                                                                                          %d comments
                                                                                          • Yea nobody would ever think a truck with pipes and a programmer had been pushed hard.....lmfao.

                                                                                          • Lol the programmers fairly new and what can I say I like the way the pipe sound

                                                                                          mk2 consul reg on 8/1/1960 grey with red roof

                                                                                          mk2 consul early 1960 good all round condition with room for improvments its a old car so if theres any genuine collector enthusiast out there that would be intrested conntact me its currently mot/ed taxed insured but has not been run for a while i will try if time given get her running correctly it has a nice originall interior body is great underside solid its not been welded to death it pulls very strongly but for various reasons it is time to part company if i can help it i dont want to ebay it as that site is a bloody joke if theres no genuine parties intrested amonst these sites then theres no hope lol more pics upon request most of its history is known

                                                                                          %d comments
                                                                                          • Just as you got used to the offset wheel 'n pedals lol

                                                                                          • Time to get yours out for some fun David!

                                                                                          • i bought this one and i never seem to get the time to work on my yellow consul so grey one has to go

                                                                                          Dreamscience Stratagem for Focus ST170

                                                                                          Just an EOI atm to see if anyone in Australia would be interested. I understand that there arent many more than 100 ST170 models here but thought it might be worth someones while as it took me ages to obtain.

                                                                                          Bought for my ST170 but have had to delete VVT for my setup so regrettably I'm having to onsell this handtuner. Has 3 lives left. Also has everything required for setup including original instruction manual and CD for install.

                                                                                          So bummed I cant use it, widely regarded as the best off the shelf tune for the ST170 but as it happens its probably the rarest. It has taken me over 2 years to find one for sale.

                                                                                          Got the pics below but have more somewhere on my phone if anyone is interested.

                                                                                          %d comments
                                                                                          • Price bud

                                                                                          • Cars
                                                                                          • Ive got it on the ad but chasing 500 if you cant see it for whatever reason

                                                                                          ford XF manual S-Pac

                                                                                          87 ford XF S-PAC 4 Spd manual NEEDS WORK looks better in photos than real life has little chips all over it, crack in windscreen needs rocker Cover gasket it leaked oil everywhere, Did just drive it from Bendigo to Werribee no problems on a permit sits really well on the road good brakes ect Temp was fine idle is abit hap hazard maybe vacuum leak, Motor had plenty of power but seems tired to me

                                                                                          I started cleaning it up honestly can't be stuffed with it and I'm just going to buy a car already with reg ect As I need a really reliable car for a up coming interstate rally

                                                                                          PICKUP werribee still has permit for 20+ days

                                                                                          %d comments